Hi, I have a new Spark 40 that arrived today and once I completed the small build-work required I took it for a spin. It's a great bike but I noticed that switching the Twinloc remote controlling the Rock Shox Reba RL Air 120mm on the front and the DT Swiss M210 at the rear resulted in very little difference.
I have the version that only has two modes, Full or Lockout. In Full there is plenty of movement in both the front and the rear, however, in Lockout mode there is slight less play on the front but still tonnes of play on the rear. I've had cheap bikes in the past that the lockout switch pretty much completely stopped play.
Is there something I can do to adjust either through cable tensions or air pressure?
Mtbr's 2016 Winter Biking GearReviews and Roundups
Results 1 to 1 of 1