-
mtbr member
Reputation:
Motion control doesn't work properly
On my Revelation Race the motion control doesn't work properly. Sometimes it doesn't return when unblocking poploc. I already changed the cable and lubricated the housing. Now I would like to disassemble the motion control to lubricate it.
Is it possible to disassemble to motion control without before disassembling the lower legs?
Thanks in advance
-
You don't need to lubricate it, as it sits in oil.
I'd recommend removing the knobs, and making sure you don't have any grit under them adding friction.
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|