Results 1 to 2 of 2
  1. #1
    mtbr member
    Join Date
    Dec 2005

    Magura Laurin Lowers - oil

    Is adding oil to the lowers on the Magura Laurins similar to that on my old Manitou Blacks. Pull the rebound knob, unthread the bolt holding the lowers and then squirt in a few cc's of lube?

  2. #2
    mtbr member
    Join Date
    Apr 2007
    Basically yes.

    Unscrew both lower leg screws halfway, whack em with a soft faced hammer to unseat the piston rods, remove screws and pull lowers off a little, let the oil drain, turn the fork upside down , add new oil etc etc.

    I'd advise removing the lowers completely and giving the foam rings and wiper seals a quick clean and lube whilst you're at it though, rather than just squirting in more oil. Magura seals are excellent but the lowers and seals do get contaminated over time.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.