I rebuilt my ISX6..
I rebuilt it at work over an oil catch bin. While cycling it, the rebound needle and spring popped out into the bin. I found a 1/8th ball bearing inside the bin.
I have no idea if this bearing came out of my shock, or if it was in there before. I cant find a parts diagram for the ISX6 either!
Anyone have any input? The bearing fit perfectly into the top cap, and i installed it... and it bent my rebound shaft! I straightened it, but the damage may have been done. At the bottom of the damper it also looks like a bearing might fit.. then again, the bearing might have been there before i started working on the shock.
Its together now, and I have insufficient rebound damping. Before, the shock rebound adjustment would go from fast to ridiculous slow. Now its just fast.
Ill buy a new rebound needle, but I need to clear up this spare bearing issue! Thanks in advance.
Mtbr's 2016 Winter Biking GearReviews and Roundups
Results 1 to 3 of 3