2013 RockShox Sid RCT 3 Setup Help
Just installed the 29er 100mm version, but can't any instruction for setting up the fork. The SRAM website is worthless.
All I can find is info on the dual air version but mine is single air.
Any help would be appreciated.
Single air versions basically requires you to set the correct air pressure for your ride i.e. 20% sag.
The RCT dial has three positions, open, threshold and locked. The LSC dial will have an affect on all 3 positions. You can run the fork in threshold mode with about 2-3 clicks of LSC, and the fork will stay firm on pedalling etc, but will react to most bumps very easily.
By ddublu in forum Shocks and Suspension
Last Post: 12-06-2012, 07:40 AM
By mbogosia in forum Motobecane
Last Post: 02-23-2012, 10:02 PM
By Dawbs96 in forum General Discussion
Last Post: 02-11-2012, 08:24 AM
By kneetowaist in forum All Mountain
Last Post: 01-09-2012, 08:11 PM
By rideitall in forum Shocks and Suspension
Last Post: 11-01-2011, 09:53 PM