TRc front derailleur with 26/39 x.0 crankset

[robsetsfire]

I'm replacing my drive train with 2x10 (from my old x.9 3x9). I'm not sure which derailleur I'm supposed to buy.

I understand that SC faq says: "The Blur TRc uses a 34.9mm bottom swing (high clamp), top pull front derailleur. Pretty much anything that fits this description (besides Saint) will work."

But specifically for a 26/39 x.0 cranks do I go with:

High Mount (DS), Top/Bottom Pull, 34.9mm Clamp (2x10) Mfg #: 00.7615.131.010
or
High Mount (DS), Top/Bottom Pull, 34.9mm Clamp, AM Model (2x10) Mfg #: 00.7615.176.010

I read the thread on people having trouble with some crank/front derailleur combinations, but I have yet to see conclusions.

For anyone running (or that has setup) this crank/ring combo on a TRc, what front derailleur do you have?

Thanks

[ban]

Hi, this is the FD I've been using w/o any problem with my TRc (size M frame) SRAM X0 2x10sp High Clamp Front Mech | Buy Online | ChainReactionCycles.com , the model I bought is the CRC #199536 (34.9mm, 42t ,dual pull) with a 39/26 Sram X.0 crankset too. I hope that helps

[robsetsfire]

Hi, this is the FD I've been using w/o any problem with my TRc (size M frame) SRAM X0 2x10sp High Clamp Front Mech | Buy Online | ChainReactionCycles.com , the model I bought is the CRC #199536 (34.9mm, 42t ,dual pull) with a 39/26 Sram X.0 crankset too. I hope that helps

Thanks. That's what I was looking for. That's the non-AM model.