Morning lads.
I'm running a Spearfish in the UK. Was built up by my LBS in part but mostly by me.
Last time in there i asked him to fit the PF / HT2 converters.
SRAM Press Fit 30 to BSA Adaptor Kit | Buy Online | ChainReactionCycles.com
I then ran a standard XTR HT2 bottom bracket.
When swapping due to excessive play in the BB, i noticed that he'd set the spacers up with 1 spacer on the non-drive side and no spacer on the drive side. I assume this was for chain line reasons rather than anything else ?
So i was just wondering how you're running your BB configuration on spearfishes ?
thanks.
I'm running a Spearfish in the UK. Was built up by my LBS in part but mostly by me.
Last time in there i asked him to fit the PF / HT2 converters.
SRAM Press Fit 30 to BSA Adaptor Kit | Buy Online | ChainReactionCycles.com
I then ran a standard XTR HT2 bottom bracket.
When swapping due to excessive play in the BB, i noticed that he'd set the spacers up with 1 spacer on the non-drive side and no spacer on the drive side. I assume this was for chain line reasons rather than anything else ?
So i was just wondering how you're running your BB configuration on spearfishes ?
thanks.