Results 1 to 7 of 7
  1. #1
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    783

    Does this toolset have necessary tools to work on my element 950?

    Found this on amazon.

    Will this have the necessary tools to take off cassette and crank?

    Just not sure about compatibility. (mostly mentions shimano)

    Thanks guys, have a nice week-end.

    Go ride your bike!

    Amazon.com: BIKEHAND Complete Bike Bicycle Repair Tools Tool Kit: Sports & Outdoors

    consists off

    1.5 2 2.5 3 4 5 6 8 10mm Hex Wrench Set
    Freehub Lockring tool for Shimano / some Campagnolo bottom brackets
    Bottom Bracket for 16 notch external crankset system cups
    Cartridge Bottom Bracket Tool (for 20 tooth internal splines such as Shimano® FSA® etc.)
    Shimano Crank Arm Dust Cap Tool
    Truvativ Isis Drive Bottom Bracket Tool
    Chain Checker Chain Wear Indicator
    Crank Puller for Splined Octalink? ISIS Drive® and square-taper type
    Crank Wrench with 14mm Socket
    8 and 10mm Open End Wrench
    12 and 14mm Open End Wrench
    Synthetic Blend Bearing Grease
    Bike Hand Chain Cleaner with Clip
    Chain Cleaner Brush
    Cassette / cog Cleaner
    Cable Cutter
    Chainring Nut Wrench
    Professional Screw Type Chain Tool with extra chain pin
    Patch Kit with patches and cement
    Professional Pedal Wrench 14 15 16 17mm
    13mm Professional Shop Cone Wrench
    14mm Professional Shop Cone Wrench
    15mm Professional Shop Cone Wrench
    16mm Professional Shop Cone Wrench
    17mm Professional Shop Cone Wrench
    18mm Professional Shop Cone Wrench
    19mm Professional Shop Cone Wrench
    30 / 32mm head set wrench
    36 /40mm head set wrench
    T25 Torx head wrench
    Shop Screwdriver #2 Phillips
    Shop Screwdriver Straight Blade 6mm tips
    Chain Whip and Freewheel/Lockring Wrench
    Red Professional Spoke Wrench
    Black Professional Spoke Wrench
    Green Professional Spoke Wrench

  2. #2
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    13,648
    Yep that has a cassette lockring tool and a chainwhip.
    I'm a member of NSMBA and IMBA Canada

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    783
    You are always so helpful, thank you.

    How about crank and bottom bracket?

  4. #4
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    13,648
    The Element BB is a BB-92 press fit, so it would need a headset/BB press and a press in BB extractor to change the BB. There is a crank puller listed for ISIS type BB and that would work for the Race Race Evolve cranks or SRAM cranks.
    I'm a member of NSMBA and IMBA Canada

  5. #5
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    783
    To make sure I understand you correct, the crank puller will work but to get the BB out I need a different tool?

    Tx again.

  6. #6
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    13,648
    Yes, the press in BB uses a completely different approach from the threaded BB, more like a press-in headset. And they use a different tool to pull them out.
    I'm a member of NSMBA and IMBA Canada

  7. #7
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    783
    Tx, Just looked them up, they are expensive.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •