Page 1 of 2 1 2 LastLast
Results 1 to 25 of 36
  1. #1
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157

    2010 Slayer SXC 50 Build (Pictures and Video!)

    Hello Rocky Mountain friends,
    I just got a 2010 SXC 50 frame from JensenUSA.
    I have some old but mostly new components to build it up.
    Here we go, I'm super excited!
    First impressions of the frame are;
    -the paint and details are amazing! Especially the carbon seat stays.
    -it looks a little smaller than I thought an 18 would be, I normally ride a 19 (5-11) but I'm sure it will be fine.
    Happiness on a blanket:
    Photobucket Pictures, Images and Photos

    Fork is a 2007 Fox Talas RL (100/120/140) with some World Cup decals on it (I'm a poser, I know. Haha)
    Photobucket Pictures, Images and Photos

    Ryder loves adjustable travel!
    Photobucket Pictures, Images and Photos

    Juicy 3s. Not the best reviewed brakes but I've had them on other bikes and they worked great and you can't beat the price.
    Photobucket Pictures, Images and Photos

    Mavic CrossRide Disc and some WTB Weirwolf 2.1 tires. As for the wheels, again not the best ratings here on MTBR but they were in the budget. The Weirwolf's are about the best rolling tire I've had so I had to get them again. (only $12 each on .com)
    Photobucket Pictures, Images and Photos

    Truvativ Stylo crankset and BB. Came off my 2005 GT I-Drive 5 and it looks practically new for being 7 years old.
    Photobucket Pictures, Images and Photos

    Shimano Deore XT RD, also from the GT. A new XT front der is enroute.
    Photobucket Pictures, Images and Photos

    Truvativ Stylo World Cup SS flatbar
    ODI Rogue lock on grips
    Thomson Elite 70mm stem
    Thomson seat post clamp
    Photobucket Pictures, Images and Photos

    Sette AMP saddle
    Easton Flatboy pedals (this is my second set of these and they are amazing especially with 510 shoes!)
    Photobucket Pictures, Images and Photos

    Stuff not yet mentioned:
    Thomson Elite seat post
    Blackspire Stinger chain guide
    Truvativ bash guard
    Photobucket Pictures, Images and Photos

    Here is my progress for day 1
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    I ordered the wrong BB tool so I'm just going to take it in to the LBS rather than wait for the return shipping process.
    First thing I noticed in my progress today is the handlebar back sweep is not going to work on a bike that's borderline too small.
    I'm going to trade it with my SS 29ers DH bar (Deity Drity30).
    Hope you enjoyed the day 1 photo journal, I sure did!
    Last edited by imsorrywhat; 06-05-2011 at 07:17 PM.

  2. #2
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    I'm 6'-1" and the 19" was just right, so at 5'-11" you should be right in the ballpark unless you have an unusually long torso or arms.

    You're likely going to want to look for a longer fork if steep descents are in your itinerary, the A2C height on a 140mm x32mm fork is a bit short for a nicely balanced SXC. The bike was designed around a 150-160mm 36mm stanchion fork which will be almost 30mm taller than your TALAS. That's quite a difference in head angle, and it will likely exaggerate the short cockpit feeling. The RS Lyrik Solo Air is a nice match for this bike, as is the Fox 36 Float 160.
    I'm a member of NSMBA and IMBA Canada

  3. #3
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Thanks for the advice Rocky.
    Unfortunately for me, a longer fork will also mean a new wheelset as almost all 160mm forks have a 15 or 20 mm thru axle.
    Which equals lots of money for 30mm. Maybe someday...

  4. #4
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    If you run a bit more sag in the rear you can help compensate a bit for the short fork. Just as long as you know that the 30mm difference in A2C height will mean a lower BB and 1.5 degree steeper head angle, and also a steeper seat tube angle by about 0.5 degree so it will quite a difference in balance from the intended setup on the bike, so don't form opinions on the handling from that configuration as it won't be representative of what the bike can do.

    With a 160mm front fork the bike is like a Hummer, you can just point it and it rolls over anything.
    I'm a member of NSMBA and IMBA Canada

  5. #5
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Here's a question:
    I installed the crown race supplied in the box. It's one I've never seen before with a separation in it (a gap that allows it to be spread) if I'm not being clear I'll remove the fork and take a picture.
    Well when tightening the fork/ headset it is either too loose (allows movement within headset) or too tight (difficult to steer)
    Any ideas?

  6. #6
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    The FSA split race headsets normally work OK as long as it is the right one to match the headset bearing, the angle on the bottom bearing race keeps the crown race in the right place without binding. Maybe just double check the way that split race sits in the headset to make sure it's on right way up and that the bevel angle matches the bearing
    I'm a member of NSMBA and IMBA Canada

  7. #7
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    You truly know everything Rocky!
    I just slid the race on not knowing it had a "groove" to fit in.
    Also, thank you again for the PM info earlier.
    If anyone else is looking for the manual for the slayer or torque specs Rocky supplied me with these:
    Tech specs
    http://www.bikeaction.de/media/pdf/2...s_Handbuch.pdf
    Manual
    http://www.silverfish-uk.com/cms-fil...22b542da25.pdf
    I switched to the Dirty30 bars and it seems a lot better. Also routed rear der cable.
    Photobucket Pictures, Images and Photos

  8. #8
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    Happy to help out
    I'm a member of NSMBA and IMBA Canada

  9. #9
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Day 2
    Discovered what I thought was the crown race is actually the part that goes on top of the headset to lock the fork on (what's this called?)
    Photobucket Pictures, Images and Photos target="_blank">Photobucket Pictures, Images and Photos
    And apparently the box shipped from Jensen didn't contain a crown race.*
    Bummer
    I'll have to call them after the weekend.

    Moving on,
    Another speed bump; the rear brake hose isn't long enough to go through the intended routing mounts, so I had to get creative. Seems like it will work fine.
    Also the supplied hose clamps are too loose so I used zip ties.
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Ok so brakes and grips are good to go.
    I'm definitely digging the DH bar more than the flat bar.
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Next step is the LBS on Tuesday for BB install and need to hunt down a crown race somewhere.

  10. #10
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    That would be the Aheadset compression lock ring. That's frustrating not to get the crown race.

    With the brake hose routed through there, make sure you depressurize the shock and run the suspension to full travel just to make sure you know where the brake hose will end up so it doesn't get hung up on the front derailleur.
    I'm a member of NSMBA and IMBA Canada

  11. #11
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Another step forward.
    BB, crankset, chain and pedals installed
    Photobucket Pictures, Images and Photos
    I found the correct BB tool at performance bike.
    Paying 15 for the tool feels much better than paying 20 for the labor.
    I tried to install the Blackspire Stinger but wouldn't work with the big chainring on.
    So then attempted to install the Truvativ bash guard to replace the big ring but lucky me, no extra long bolts supplied to install it.
    (E13 bashguards come with hardware, not sure why Truvativ doesn't.)
    Im going to scratch the idea of 2x9 chain guide/ bash guard for now and run 3x9.
    As for front derailleur:
    Any idea if this will work? (there's no size listed)
    http://www.pricepoint.com/detail/166...Derailleur.htm
    Now to attempt setting up a rear derailleur for the first time.
    Uh oh..

  12. #12
    mtbr member
    Reputation:
    Join Date
    Apr 2007
    Posts
    3
    FYI, I got this exact same frame from Jenson, the crown race is in the separate plastic bag along with couple small parts.

  13. #13
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Yeah, I went through every square inch of the box. No crown race. I even dissected all the packaging with no luck. There was a plastic bag empty in there and all the small parte were all over the place.
    Last edited by imsorrywhat; 05-30-2011 at 08:00 AM.

  14. #14
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    You need a low clamp front derailleur. If you're going to run a triple you'd want to use a different derailleur than if you were going to run a double ring. The Double ring FD has a smaller cage for less likelihood of tire or swingarm interference, and the cage fits down closer to the bashguard so the derailleur doesn't look like it's wading through water and trying not get its pant legs wet. The double ring FD will fit up to a 36T ring/bash

    Triple ring FD

    http://www.pricepoint.com/detail/181..._31.8_34.9.htm

    http://www.pricepoint.com/detail/170...Derailleur.htm

    Double ring FD

    http://www.pricepoint.com/detail/181..._31.8_34.9.htm

    When positioning the rear derailleur on the frame stub, you want to double check that the swingarm does not touch the clamp on the derailleur frame stub (especially important when using a double ring crank setup), so either depressurize the shock and compress the suspension fully, or remove one end of the shock from the frame mount to allow the suspension to compress fully.
    Last edited by rockyuphill; 05-30-2011 at 07:25 AM.
    I'm a member of NSMBA and IMBA Canada

  15. #15
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    136
    Great looking bike!

  16. #16
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Switched from 70mm to 50mm Thompson stem.

    Photobucket Pictures, Images and Photos

    Setup the rear derailleur for the first time after watching a couple YouTube videos.
    It was super easy, I can't believe I payed for that in the past.

    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos

    Crown race should arrive from Jensen on Thursday then I can finally ride it.
    Last edited by imsorrywhat; 05-31-2011 at 05:51 PM.

  17. #17
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Had a great first ride!

  18. #18
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157

    First Ride Report

    Frame and Fox RP23 were stellar!
    It was my first experience with pro pedal and I'm now a big fan. I switched it on for the uphills only and didn't feel any "bob" at all. Not even while mashing like on my single speed.
    The bike has been described by others as having a "bottomless rear travel feel on the descents" and I totally agree.

    Component group; no issues at all. Everything felt great.
    I still haven't got a front derailleur so it took my old top pull that won't work with the frame and just mounted it and set it to stay on the center chainring.
    Chain never came off once, ghetto but functional.

    My .com watching addiction payed off again. Caught a brand new, 2010 Fox Talas 150RL (a rare white version) for $420.
    So that equals a need for a new wheelset to accommodate the 15mm thru axle..Forte Xenduro's are my solution.

    Other changes: replaced the 7 year old chain with a SRAM PC971 and also replaced the rear derailleur cable.

    Fun times my friends.

  19. #19
    DGB
    DGB is offline
    mtbr member
    Reputation:
    Join Date
    Sep 2007
    Posts
    464
    That looks like a very nice build.
    Personally, my only concern would be with that short rear brake cable. I can imagine that it would do some damage to both the paint and the brake hose over time if left in that position.

    I'm not too familiar with the Forte Xenduro wheels that you mentioned, but if the rear is available as a 10mm thru-bolt version I would strongly recommend getting that over a standard QR rear. When I switched from the stock wheels on my SXC to a 10mm thru-bolt EX1750 there was noticeable improvement in rear stiffness.
    I had a pair of those Crossride wheels on my HT, they're were not bad overall but they were heavy and a bit narrow for wider tyres. A switch to a lighter wheelset offers a big, obvious improvement in the handling of the bike.

    Another thing to consider is some form of protection for the drive-side chainstay - be it an inner tube wrapped around the stay or a neoprene protector to keep the chainstay looking in good condition. It'd be a shame to damage it when the rest of the bike looks so good.

  20. #20
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    Thanks DGB.
    Once I sell the talas that's on there I plan on getting some elixir 5s. Anyone have any experience with these?

    The Xenduro's do have a 10mm thru rear and are on sale for $220 for the set. There's some mixed reviews on the rear free hub but my friend at performance ensured me I'd be taken care of if it broke.

    Good call on the chain stay protection, a definite must.

  21. #21
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157
    New fork, wheelset and tube chainstay protector.
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos

  22. #22
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157

    I have a lot of time on my hands..

    I wanted to tie in the fork with the rest of the bike and I have an endless supply of vinyl in every color. (if anyone wants some, PM me. I'll send it out gratis/ you pay postage)
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    That old TALAS sold in one day (I think it was the world cup decals, haha) so I ordered a set of Elixir Rs and an XT front derailleur.

  23. #23
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    Posts
    14,040
    OK, now if it were my bike I'd be replicating that swoopy leaf on the top tube and integrating the leaf into a Fox logo for the fork legs.

    On my SXC I went this route
    Attached Images Attached Images
    I'm a member of NSMBA and IMBA Canada

  24. #24
    mtbr member
    Reputation: imsorrywhat's Avatar
    Join Date
    Oct 2010
    Posts
    157

    Ok I'm done

    Photobucket Pictures, Images and Photos
    Photobucket Pictures, Images and Photos
    Added the Elixir Rs
    Photobucket Pictures, Images and Photos
    Also the XT front derailleur and MRP bashguard.
    Photobucket Pictures, Images and Photos
    Here's another video: Roller-coaster Singletrack

    Make sure to stay tuned for the 6 inch jump in slo-mo. (I'm a madman!)

    I'm very happy with the finished product, the bike rides awesome!
    Huge thanks to rockyuphill and RMB PM for all the advice.

  25. #25
    mtbr member
    Reputation: Farris05's Avatar
    Join Date
    Jul 2009
    Posts
    5
    That turned out great! And those stripes on the fork are spot on!

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •