Reverb Connectamajig on a Mach 6
Ok, so you guys make me want a dropper.
So this is two questions in one:
- Does the Connectamajig fit through the Mach 6's internal routing or do I have to disconnect the barb?
- I am weighing up between Reverb Stealth/KS Lev/Hilo Strate
They all have ups and downs. Not keen on the KS Lev cable coupler (using the cable housing as the 'moving part' of the actuation. Rockshox bleed puts me off. Hilo Strate, reliability / speed issues. Advice welcomed.
Go with the KS LEV Integra....they have now updated the mechanism and it does NOT need the housing to actuate the dropper...make sure you specify when ordering...
I have the Integra with the housing that moves and have had no issue thus far...I did contact KS and they would update the mech free of charge if I send it to them with a proof of purchase....
Last edited by pedal-man; 05-26-2014 at 12:59 PM.
Originally Posted by pedal-man
Was that a typo? Does the new KS LEV actuate
- with a fixed cable and a moving cable housing
- or a fixed cable housing and a moving cable?
Ahaa, I found this post http://forums.mtbr.com/all-mountain/...-863686-2.html that shows
which looks perfect.
Fixed...the NEW integra does not rely on the cable housing moving to operate. The housing will remain "fixed" with a new mech on the bottom for actuation..sorry for the confusion...
Originally Posted by trickbooter
By kleinhead in forum 27.5
Last Post: 10-13-2013, 11:04 AM
By greg in forum Pivot Cycles
Last Post: 09-27-2013, 02:55 PM
By ccarbot in forum Pivot Cycles
Last Post: 07-07-2013, 05:58 PM
By WorldIRC in forum Trek
Last Post: 07-01-2013, 08:12 PM
By Highland28 in forum Pivot Cycles
Last Post: 01-20-2013, 07:48 PM