norcosam, sorry but the spare spring I have is 350 lbs.
Ryates,Thanks for looking
just found out from Malcolm that CCDB servicing in the UK is through OxShox.
email@example.com Contact Tim Aust
Seems they are part of K9. I hope they do a better job at servicing than their website would indicate, which is full of typo's.
EVENTUALLY GOT MY CCDB CUSTOM TUNED !!!!!!!!!
HERE’S THE INFO FROM STENDEC :
• FLOWING PISTON AIR CHAMBER SET AT 25mm
• INCREASED 4 SHIMS ON COMPRESSION STACK
• HIGHER BLOW-OFF THRESHOLD DUE TO INCREASED OIL FLOW.
• N2 PRESSURE SET AT 220PSI
• THIS PROVIDES A MORE DYNAMIC FEELING SHOCK [MORE ACTIVE] WITH MORE POP AND MID STROKE STABILISATION.
• LSC + 6 CLICKS OUT
• HSC ¾ TURNS OUT
• LSR + 8 CLICKS IN
• HSR 1 TURN OUT
• FITTED NEW BOTTOM OUT DAMPER [4mm NOT STD 8mm] GIVES MORE STROKE TRAVEL.
• NEW O RING SEALS FITTED.
• NEW 500# TI SPRING INSTALLED.
FOR ANY MORE INFORMATION, CONTACT DAVE AT STENDEC-WORKS. http://www.stendec-works.com/
Bear in mind that this is now custom tuned to my requirements and complaints about the standard shock and it's [in]action for my riding style [or lack thereof] !!!
Ability? These are the basic skills.
Originally Posted by The_Lecht_Rocks
As for the CCDB: beware of Sendec:
Originally Posted by gpaevo
Originally Posted by dlysexic
Originally Posted by Tom L
Originally Posted by gpaevo
Originally Posted by pwadjo
Originally Posted by Turnerkid
Tim Aust at oxshox.com are the official CCDB service agents in the UK. He does tuning as well. Has anybody got feedback on them?
Is that new?
Originally Posted by loamranger
When I contacted extra about warranty work they pointed me to stendec.
Originally Posted by dipper
Malcolm told me.
Blimey.... mine feels superb so far anyway no complaints....
Thanks for the heaDs up on oxshox too. I'll be speaking to TIM today...
As posted elsewhere, TFTuned are now dealers and the official UK service centre for CCDB Shocks.
I'm so tempted.
CCDB on an AC - what spring?
I have a 2010 AC with levers for 200 - 50 shock , the top hole is blanked off.
I weigh 157lbs in my socks.
I would like to fit a CCDB to the AC , when the bushes from Stendec arrive.
If anyone has fitted one of these to an AC could they advise me on the spring (steel) I will need , as I think the current one at 450lb will be too strong.
Cheers for any help.
speak to dave at stendec - he has the ratios and link charachteristics for the AC and will advise accordingly......let me know how you get on
mojo spring calculator here: :::: MOJO SUSPENSION ::::
Originally Posted by jfb1
Good luck with the build
loamranger - thanks for the link , if I used it correctly I will need a 550lb spring , which surprised me , so will try what I have then experiment with different poundages as required.
TLR - will give Dave a call tomorrow , also thanks for bringing him to my attention , I had him service the 2006 DHX5 air shock which is currently on the AC & as he put it "give it a bit more pop" . the ride is much improved , the shock now rides higher in it's travel , does not blow through the mid range & the propedal settings work.
Thanks again both
well the AC has gone , which leaves me with a CCDB & fox DHX5A,
If anyone is interested in either email me at firstname.lastname@example.org
Looks like an awesome new communication platform for CCDB users: The Lounge. CANE CREEK marketing "directrice" Holly COLSEN speaks.
Eurobike 2012 - Cane Creek von Thomas - mehr Mountainbike-Videos
Furthermore worth viewing: CANE CREEK director of development Joshua COAPLEN speaks.
CaneCreek DoubleBarrel - Funktionsweise von Grinsekater - mehr Mountainbike-Videos