Burgtec Offset Shock Hardware
Anyone tried it or know if it will fit any Nicolai"s?
Burgtec Titanium Offset Shock Hardware | Burgtec
I haven't used these but I did undertake an experiment to see if altering my AM's geometry via a different shock shuttle would work.
In essence, the shock shuttle I tried moved the shock forward 7mm, dropping the BB and reducing the HA by about 1.5 degrees.
I compensated by fitting a shorter fork and running the bike in the third hole down for travel.
What I found was geometry that worked really well but the spring rate of the shock got really progressive. It was like riding a slopestyle bike or something where the spring rate ramps up massively. I found I was loosing control and getting my feet blown off the pedals quite a bit.
But that was a 7mm forward shift. These bushings do the same thing but only by I think about 3mm? That's going to reduce the HA by less than a degree I think, but don't quote me. BB will drop slightly as well.
Of course all this depends on what bike you're thinking of putting them on.
By grantw9066 in forum Downhill - Freeride
Last Post: 07-20-2011, 07:43 AM
By grantw9066 in forum Shocks and Suspension
Last Post: 06-23-2011, 09:30 PM
By bdamschen in forum Cannondale
Last Post: 03-26-2010, 10:19 AM
By -Insomnia- in forum Urban/DJ/Park
Last Post: 06-14-2007, 04:01 PM
By schoolisbad1 in forum Shocks and Suspension
Last Post: 10-16-2006, 03:38 PM