Results 1 to 6 of 6
  1. #1
    mtbr member
    Reputation: nineracerxer's Avatar
    Join Date
    Sep 2007
    Posts
    76

    DUC Adjustable Stem Manual or Setup Pics?

    I was looking to switch my stem from 95mm to 85mm just to try it out and wondered if there was a one page write up on adjusting the stem. I am guessing it is a simple adjustment but wanted to know if anyone had pics or diagrams before I get all the pieces laying on the counter....

  2. #2
    Schipperkes are cool.
    Reputation: banks's Avatar
    Join Date
    Feb 2004
    Posts
    4,002
    the middle piece, where the big steerer shaft bolt goes through is reversible and the holes will line up. Flip the stem over and you will see the etching on the bottom.
    Quote Originally Posted by mikesee
    Better suited to non-aggressive 125# gals named Russell.

  3. #3
    Fortes Fortuna Iuvat
    Reputation: Datalogger's Avatar
    Join Date
    Jul 2008
    Posts
    1,211
    Yup, just as Scott said. It will only take a few minutes to adjust.
    Maverick Durance Ano-DUC32/C KING/XTR
    Mav ML8 Ano-DUC32/X0
    Mav ML8-DUC32/I9/XTR
    09 Spec. Demo-Totem-Ti DHX
    Norco Team DH

  4. #4
    mtbr member
    Reputation: nineracerxer's Avatar
    Join Date
    Sep 2007
    Posts
    76

    great!

    thanks for the quick response! Is there some trick to get the 75mm position out of the stem where something has to be flipped or rotated in addition to moved, or is it all just as easy as moving the thing out 10mm at a time? Something about the two adjustment screws and three positions has me wondering...

    Name:  Photo0262rdx.jpg
Views: 180
Size:  65.8 KB

  5. #5
    Schipperkes are cool.
    Reputation: banks's Avatar
    Join Date
    Feb 2004
    Posts
    4,002
    Quote Originally Posted by nineracerxer
    thanks for the quick response! Is there some trick to get the 75mm position out of the stem where something has to be flipped or rotated in addition to moved
    Quote Originally Posted by banks
    the middle piece, where the big steerer shaft bolt goes through is reversible and the holes will line up. Flip the stem over and you will see the etching on the bottom.
    Quote Originally Posted by mikesee
    Better suited to non-aggressive 125# gals named Russell.

  6. #6
    mtbr member
    Reputation: nineracerxer's Avatar
    Join Date
    Sep 2007
    Posts
    76

    got it.

    thanks, you're right, that was easy. I got from 95 to 85mm by removing only the screw through the hole on the side of the stem and moving from the orange arrow hole to the green arrow hole. The numbers on the bottom were right where you said, thanks!


    Name:  Photo0518rdx.jpg
Views: 166
Size:  70.2 KB
    Name:  Photo0520rdx.jpg
Views: 158
Size:  62.5 KB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •