I just rebuilt my fork and I've never actually measured from the seal to the bottom before until now. The reading came out to 5.5". Hopefully this is just the negative spring. I can pull the wheel down to get the full 6". Is this normal? Other than that the fork feels awesome!
I weigh 200lb ready to ride and fork set up is:
5nm negative spring
air cartridge 90psi with 15cc to help with bottoming out
damper side 80psi with stock shims.
Results 1 to 3 of 3
Thread: DUC 32 static sag???
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »