The front hub on my mount vision (XM6) started to get loose. After some digging I found out that my thru axle quick release lever was to loose. After tightening it was much better, but still there is a little knocking when applying force to the sides or holding the front break and trying to spin the wheel .
I own the bike about an year and a half and have about 1500km on them.
I'm thinking that servicing the hub bearings might do the work, but can't figure out how to open up the hub.
I found no documentation stating what kind of hub they have. The hub only have "Marin" imprinted on it.
I don't want to go to my LBS where I bought the bike because honestly I just don't trust the guy mechanically, and I like doing all the mech stuff myself.
any idea what kind of a front hub the XM6 has? any idea how to get access to the bearings?
Results 1 to 1 of 1
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »