Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    383

    Tenergy TLP-4000 Universal 1A Charger for Li-Ion Batteries

    Anyone have one of these chargers? I was wondering if it is safer (and/or better for your battery packs) than the standard wall-wart charger that comes with Magicshine / clone lights.

  2. #2
    mtbr member
    Reputation:
    Join Date
    May 2005
    Posts
    2,300
    That is very similar to the charger I have supplied when I sell one of my lights and so far they have been pretty good. The only thing I have had happen with them was when charging a 14.8V pack. The battery PCB would occasionally stop the charge before the charger thought it was done. I think the PCB was a bit too low on the overcharge protection voltage because the pack voltage was right at 16.8V. The only thing that happened in those times was the charger light will always show that it was charging.

  3. #3
    mtbr member
    Reputation:
    Join Date
    May 2005
    Posts
    2,300
    Oh, BTW they are not real fast. Depending on your pack capacity it will take 4 to 8 hrs for a full charge.

Similar Threads

  1. leave batteries plugged into charger ?
    By androgen in forum Lights and Night Riding
    Replies: 4
    Last Post: 09-05-2013, 11:31 AM
  2. Free batteries and charger
    By Buddha43 in forum Lights DIY - Do It Yourself
    Replies: 1
    Last Post: 04-24-2012, 09:05 AM
  3. Decent Rechargable AA/AAA Batteries and Charger?
    By highdelll in forum Lights and Night Riding
    Replies: 17
    Last Post: 11-23-2011, 01:42 PM
  4. Leaving niterider batteries on charger
    By fighterinsnatch in forum Lights and Night Riding
    Replies: 3
    Last Post: 05-23-2011, 05:05 PM
  5. Tenergy charger issue
    By Andy13 in forum Lights DIY - Do It Yourself
    Replies: 8
    Last Post: 04-20-2011, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •