Results 1 to 20 of 20
  1. #1
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    291

    XPGQuiccpower now takes Regina

    Just an update our single XPGQuiccpower has been modded to accept the pins of the Ledil Regina
    Cheers
    WeLight

    Cutter Electronics Pty Ltd www.cutter.com.au

  2. #2
    removing nudity
    Reputation: emu26's Avatar
    Join Date
    Jun 2008
    Posts
    4,197
    Is that both the 12.5mm and the 16mm versions or only the 16mm version?

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jul 2005
    Posts
    1,681
    So...did you use different componentry on the board, b/c it doesn't look like the Regina could even set down on there b/c of that black "4R7" thingy-ma-jigger on the right?

  4. #4
    Randomhead
    Reputation:
    Join Date
    Sep 2008
    Posts
    1,042
    it would be nice to have a little more information about the features of these devices

  5. #5
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    291
    Hi Guys
    Yes when we have stock of the new pcb with Regina mounts i will release a complete datasheet on it
    Cheers
    WeLight

    Cutter Electronics Pty Ltd www.cutter.com.au

  6. #6
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    291
    Quote Originally Posted by chelboed
    So...did you use different componentry on the board, b/c it doesn't look like the Regina could even set down on there b/c of that black "4R7" thingy-ma-jigger on the right?
    Yes new data and images will clarify the differences
    Cheers
    WeLight

    Cutter Electronics Pty Ltd www.cutter.com.au

  7. #7
    mtbr member
    Reputation: znomit's Avatar
    Join Date
    Dec 2007
    Posts
    1,693
    Quote Originally Posted by WeLight
    Hi Guys
    Yes when we have stock of the new pcb with Regina mounts i will release a complete datasheet on it
    Gonna have a regina friendly boring MCPCB too?
    DIY LED Bike Lights:
    A few Dynamo builds and some Small battery lights

  8. #8
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    291
    Quote Originally Posted by znomit
    Gonna have a regina friendly boring MCPCB too?
    What size would you like to see?
    Cheers
    WeLight

    Cutter Electronics Pty Ltd www.cutter.com.au

  9. #9
    mtbr member
    Reputation: znomit's Avatar
    Join Date
    Dec 2007
    Posts
    1,693
    Quote Originally Posted by WeLight
    What size would you like to see?
    20mm is fine.

    Messing with them this week, looks like the alignment isn't precise once you grind the legs off.
    DIY LED Bike Lights:
    A few Dynamo builds and some Small battery lights

  10. #10
    Bigger is better!
    Reputation:
    Join Date
    May 2005
    Posts
    682
    Quote Originally Posted by znomit
    20mm is fine.

    Messing with them this week, looks like the alignment isn't precise once you grind the legs off.
    WeLight - any news on this?

  11. #11
    removing nudity
    Reputation: emu26's Avatar
    Join Date
    Jun 2008
    Posts
    4,197
    email went out early this week or late last week. From memory, and I would quote but sorry I deleted it, the 7 up is now available and the data sheet with the single will be available soon.

    Eagerly awaiting the triple, nudge nudge welight

  12. #12
    mtbr member
    Reputation:
    Join Date
    Feb 2009
    Posts
    300
    What? a 7up board with integrated driver is available at cutter??

  13. #13
    removing nudity
    Reputation: emu26's Avatar
    Join Date
    Jun 2008
    Posts
    4,197
    absolutely, here

  14. #14
    mtbr member
    Reputation:
    Join Date
    Feb 2009
    Posts
    300
    Deleted due doublepost

  15. #15
    mtbr member
    Reputation:
    Join Date
    Feb 2009
    Posts
    300
    Ohhh ok, thanks

    But imho this is not so useful as a bike light!

    Quote from Cutter page:
    Features include

    - Two modes all 7 or 3 central in a row. set by briefly interrupting the power. No real dimming why?
    - Can run up to 1000mA per XPG (this would be close to the max but you can specify a
    reasonable range when ordering)
    - Thermal regulation with dimming at 80C.
    - 11 to 20V operation
    - 8V operation at reduced power level (4 LED operating)
    - Same physical diameter as PL121xxx Khaotd optic with space for two M3 mounting
    holes.

    Customisation is available, subject to minimum order quantities Please contact us.
    This would include but is not limited to:

    - Under voltage shut down or reduced power mode. this would be great
    - Voltage warning with a blink. also a great feature
    - Different power levels. absolutely needed, three dimming levels high/mid/low with all leds!!
    - Flash modes. should not be incorporated (or available in an submenu so it does not interfere when switching the 3 standard modes)
    - A Red/Blue police/emergency version (often referred to as a wig/wag) With appropriate
    flashing mode.
    - Amber warning version.
    - Royal Blue/White for Coral Grow Applications

    So, the standard version is not suitable for us, what are the minimum quantities to produce a suitable light engine for us night riding folks??

  16. #16
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    291
    We are still fine tuning firmware so will update on the dimming issue soon
    Cheers
    WeLight

    Cutter Electronics Pty Ltd www.cutter.com.au

  17. #17
    mtbr member
    Reputation:
    Join Date
    Apr 2007
    Posts
    319
    Thanks WeLight.

    For my biking use the following are on the essential list:
    1) Adjustable dimming (reduced current = efficiency).
    2) Adjustable low battery shutdown.
    3) UI allows cycling between high and low without passing through either off or flashing.

    On my would-be-nice list are:
    4) 5S battery operation (ie 22V withstand)
    5) Some sort of low battery warning.
    6) A third very low power setting (press and hold to access?).
    7) Low power commuting flash.
    8) High power help/SOS flash.

    Hope this helps.

  18. #18
    mtbr member
    Reputation: znomit's Avatar
    Join Date
    Dec 2007
    Posts
    1,693
    Quote Originally Posted by WeLight
    We are still fine tuning firmware so will update on the dimming issue soon
    I bet you need some beta testers
    DIY LED Bike Lights:
    A few Dynamo builds and some Small battery lights

  19. #19
    mtbr member
    Reputation:
    Join Date
    Feb 2009
    Posts
    300
    Quote Originally Posted by Mark2c
    Thanks WeLight.

    For my biking use the following are on the essential list:
    1) Adjustable dimming (reduced current = efficiency).
    2) Adjustable low battery shutdown.
    3) UI allows cycling between high and low without passing through either off or flashing.

    On my would-be-nice list are:
    5) Some sort of low battery warning.
    6) A third very low power setting (press and hold to access?).

    Hope this helps.
    Great points Mark! I am in too!!

    Quote Originally Posted by znomit
    I bet you need some beta testers
    +1

  20. #20
    mtbr member
    Reputation:
    Join Date
    Feb 2009
    Posts
    300
    WeLight - any updates on the 7up quickpower board?
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •