Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation:
    Join Date
    Jul 2008
    Posts
    166

    first time build with cree leds very happy with them

    hi all
    i havnt built a light since last year even though i bought a load of supply parts leds optics etc. all mt previes lights have been built using p4,s or p7,s.this light is a upgrade for a mate at work 2 x xlamp 7090 xp? dx .8amp driver folded and welded body as i havnt acess to a mill at the momment.cant beleive how far they punch compaired to the p4,s i think i,ll only use cree,s from now on.
    si






    im hoping to have some bodys milled once ive finished this so the machine shop can quote a price it will be out of one peice of ally block

  2. #2
    mtbr member
    Reputation:
    Join Date
    Feb 2010
    Posts
    46
    Thwang,
    That's a fine light you have made. How did you make the body?

  3. #3
    mtbr member
    Reputation: HuffyPuffy's Avatar
    Join Date
    Jun 2008
    Posts
    890
    Nice work, I recognize most of the parts from DX there. I have a bin with some similar parts from past projects, they still make nice lights, better than can be bought for several times the price.

  4. #4
    mtbr member
    Reputation:
    Join Date
    Jul 2008
    Posts
    166
    hi sbjohn
    i use a press break at work so it was folded from 3mm alloy flat bar it i get chance next week i,ll makw an other body but with 3 leds.
    thwang

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •