Results 1 to 5 of 5
  1. #1
    mtbr member
    Reputation:
    Join Date
    Aug 2008
    Posts
    409

    Current Drive Selection

    With this much choice, what are the logical choices (Heat vs Output)

    0 click (dim) → 350 mA select (shipping default)
    1 click (brighter) → 500 mA select
    2 click (brighter) → 700 mA select
    3 click (brighter) →1000 mA select
    4 click (brighter) →1200 mA select
    5 click (brightest) →1300 mA select

    Or does everyone just leave it set to the default..?

  2. #2
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    56
    it all depends on the houseing and the which led your using

  3. #3
    mtbr member
    Reputation:
    Join Date
    Aug 2008
    Posts
    409
    for me, (I think it is) 3x XPE R3 and 4x XPG R5 its in a 7UP
    Last edited by EFMax; 08-24-2010 at 08:15 AM.

  4. #4
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    56
    i would set it at 700ma for a balance of run time and output but have a look here for some more info CLICK ME

  5. #5
    mtbr member
    Reputation:
    Join Date
    Aug 2008
    Posts
    409
    Quote Originally Posted by acezone
    i would set it at 700ma for a balance of run time and output but have a look here for some more info CLICK ME
    Ok, thanks for that... runtime is fine as I have used a 3x 4cell arrange which should be about 7.8Ah and was experiementing with setups but will set it at either 700ma or 1000ma to see if there is any difeerence if none that is worth it, then I will just leave it at 700ma as you suggest.. cheers..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •