Can anyone give me a CAD drawing or diagram showing the positions of the terminals on the old Bflex and newer B2flex drivers? I am particularly interested in the LED connections.
My housing has a 26mm recess for the board and I want to drill through so the LED wires enter the board from behind in the right place. However I also need the holes to miss the stars on the other side, so I need to be accurate.
I tried measuring the board but attempt 1 missed by a few mm. Thanks to bendy silicone wire I can get away with the mistake but before I make another I thought I'd ask if anyone already had the correct dim's.
George, this info would be helpful for all of your boards. I don't need the component layout but the positions of the terminals would be useful.
Results 1 to 7 of 7
Thread: Bflex/B2flex terminal positions
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »