In a few weeks I'm going to be sending a small run of lights to be type 3 hardcoat black anodized. If anyone has some lights or other parts that they would want done I can add them to my shipment. The minimum order on hardcoat usually runs between $100-150 so I thought I'd offer it up in case anyone wanted it done.
I would need to confirm before the order is shipped but it should be around $15 a part give or take some depending on how much is sent. They don't do finishing so you'd have to prep the part yourself. The place I'm sending does a 2mil layer so .001 penetration and .001 build up.
Results 1 to 1 of 1
Thread: Anodizing Offer