Photo/Link from Deal Extreme.
Use these drivers frequently and noticed that last 2 orders of drivers had a current of 650mA on the dot.
Just recieved a new order and they have a current of around 900mA. Been using these drivers for about 2 years and, except for those 2 650mA shipments, they always had a current around 900mA.
Anyway here is the picture of the drivers side by side.
The driver on the left has a resistor in the R5 pad. The resistor is a R750, and so is the resistor above the negative LED wire. This driver has a current 650mA.
The driver on the right without the R5 resistor has current of around 900mA. The resistor above the negative LED wire is a R27.
The picture at Deal Extreme shows the circuit board without the R5 resistor.
Over the past 6 months have received 2 orders without the extra resistor and 1, the most recent shipment, with the R5 resistor.
Just a heads up for anyone ordering.
Results 1 to 1 of 1
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »