Results 1 to 8 of 8
  1. #1
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    80

    Endorphin suspension setup help

    Any tips for setting up the suspension on an endorphin? Seems to either be too much pedal bob or too stiff. Haven't found the sweet spot yet. Running CCDBAir.

    Sent from my SM-G935V using Tapatalk

  2. #2
    mtbr member
    Reputation: KRob's Avatar
    Join Date
    Jan 2004
    Posts
    11,405
    I've found that I like to run 30-35% sag for the plush feel when bombing rougher track then leave the climb switch in the partially closed position to firm things up for pedaling. I rarely close it completely or open it all the way. It's like a rheostat and a little bit of CS will do for most trails.

    The other thing that helps (or I assume would help as I haven't done it yet) is to add a spacer band to help it ramp up and prevent bottoming on the bigger hits and g-outs.

    As far as the compression and rebound settings, I haven't strayed too far from the Knolly suggested settings. A click or two here and there, but that's about it. They are pretty close.
    I will cause thee to ride upon the high places of the earth...
    Isaiah 58:14

    www.stuckinthespokes.com

  3. #3
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    80
    Which base tune are you using? The card that came with the bike is different than the recommendation on the cane creek website. The website tune actually looks like it'll work better than the base tune on the card that I've been running. I'll give that a shot tomorrow

    Sent from my SM-G935V using Tapatalk

  4. #4
    mtbr member
    Reputation: sherwin24's Avatar
    Join Date
    Jul 2010
    Posts
    296
    I'm running an Inline, but I think it would be similar. A few psi can make a big difference I have found. It might not show much difference in sag but a few extra psi gave me the sweet spot while leaving the settings basically stock, or adjusting slightly for certain conditions.

    I also use the CS switch but rarely ever fully closed, just enough to firm it a bit on long climbs.

    I initially tried adding volume spacers but that wasn't the answer for me, I couldn't get it to feel right with them in.

  5. #5
    mtbr member
    Reputation: David R's Avatar
    Join Date
    Dec 2007
    Posts
    1,339
    Quote Originally Posted by Sonoma_MTB View Post
    Which base tune are you using? The card that came with the bike is different than the recommendation on the cane creek website. The website tune actually looks like it'll work better than the base tune on the card that I've been running. I'll give that a shot tomorrow
    Let us know how it goes! I started with the base tune on the card that came with the bike, and have backed off the LSC and LSR a few clicks, and the HSR a touch too. Haven't tried adding any bands yet, not going to put too much more effort into it as I'm going to do the DBAir IL upgrade when the NZ supplier get the bits in.

  6. #6
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    80
    Alright, the base tune from the cane creek website feels amazing. Not sure why the card that came with the bike is so far off. I think the LCS on the card was just way too low and I was trying to compensate with air. Lesson learned.

    Bike was feeling incredible until I cracked my Nox Kitsuma rim (2nd time in 6 months ).

    Website base tune:

    Card tune:

  7. #7
    mtbr member
    Reputation: David R's Avatar
    Join Date
    Dec 2007
    Posts
    1,339
    Oops, just noticed that you're running the DBAir CS, and I'm running the Inline. Interesting that the sag for the DBAir CS is 2mm more than the Inline.

  8. #8
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    175
    Post you're impressions with the coil once you have some time on it . I'm loving the DBA CS. I'm heavy but not using any bands. I couldnt get on at all with the fox DPS.

Similar Threads

  1. Suspension setup
    By Dr Gigi in forum Shocks and Suspension
    Replies: 13
    Last Post: 01-03-2017, 12:37 PM
  2. Suspension Upgrade For My 2014 Endorphin
    By kevinboyer in forum Knolly
    Replies: 15
    Last Post: 01-18-2016, 11:27 PM
  3. Endorphin rear shock setup issues
    By jubilee in forum Knolly
    Replies: 24
    Last Post: 10-03-2012, 07:24 AM
  4. 951 Suspension Setup (Fox)
    By mbell in forum Intense
    Replies: 3
    Last Post: 06-13-2012, 03:02 PM
  5. Suspension Setup Once and for all...
    By eliadzone in forum Shocks and Suspension
    Replies: 17
    Last Post: 12-14-2011, 01:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •