Results 1 to 2 of 2
  1. #1
    mtbr member
    Join Date
    Aug 2006

    XLT Suspension Bearing Replacement.

    I bought an Enduro bearing kit for my 2005 XLT and wondered if anyone had changed bearings out on their bike before. What is the best way to go about removing these things? I am thinking a combination of bolts, sockets, washers, and nuts to pull or push them out and back in. I know I have seen some pictures somewhere on how to replace them but cannot find them anymore.

  2. #2
    mtbr member
    Reputation: Bartman's Avatar
    Join Date
    Mar 2004
    I have bought the same kit and only replaced the bearings that felt stiff. I was able to hammer them out gently with a round chisel. I pressed them in using a wood faced vise. Just be careful to press them in straight. I have done this before and worked well. Good luck

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.