Results 1 to 1 of 1
  1. #1
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    43

    Jamis XCR bushing reducers for RS Monarch

    Hi there,

    I'm replacing the stock Rock Shox Bar 2.1 on my Jamis XCR sport with a used but freshly rebuilt Monarch 3.3 with new bushings.

    My question is that the Bar 2.1 has a 12mm eye while the Monarch has a 12.7mm (1/2") eye. The inside diameter of the bushing on the monarch is slightly bigger than the bar.

    Does anyone know where I can find the correct reducers to mount the monarch onto my frame? The existing reducers are a little small in the bushing and I don't want to do the beer can fix.

    The bike is a 2008 Jamis Dakar XCR Sport. Any help would be appreciated. All the LBS did was take a look in his small parts bin and provide me some parts he had laying around (which were not correct).

    EDIT: The pin is also known as the reducer apparently
    Attached Images Attached Images  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •