Results 1 to 7 of 7
  1. #1
    mtbr member
    Reputation: OneBikeGuy's Avatar
    Join Date
    Nov 2006
    Posts
    765

    Convertible? FSA Orbit Xtreme Pro

    I was looking at the Orbit Xtreme Pro for 1-1/8 and realized that the cups look like they work for the OnePointFive forks, too. Peeps, do you think if I get the Xtreme Pro race and the top cup for the OnePointFive version then I can use the same cups from 1-1/8 version?
    If that is so, that's hot because then I can interchange forks between 1-1/8 and OnePointFive on my 6.6.
    Full filled with 6.6 then migrating to Slope Style for more. "Intense Slope Style Central"

  2. #2
    ixi
    ixi is offline
    mtbr member
    Reputation:
    Join Date
    Nov 2004
    Posts
    142
    Yep, I have an extra set of what you need. I sent you a PM.


  3. #3
    mtbr member
    Reputation: OneBikeGuy's Avatar
    Join Date
    Nov 2006
    Posts
    765
    Ah, that is what I have and I want the ones for OnePointFive. Thanks anyway.
    Full filled with 6.6 then migrating to Slope Style for more. "Intense Slope Style Central"

  4. #4
    mtbr member
    Reputation:
    Join Date
    May 2006
    Posts
    249
    I have a new 1.5 - 1 1/8 I didnt use when I set up my Socom pm me if your interested.

  5. #5
    mtbr member
    Reputation: OneBikeGuy's Avatar
    Join Date
    Nov 2006
    Posts
    765
    no, no, I want to use the cups for 1 1/8 with 1.5 fork.
    Full filled with 6.6 then migrating to Slope Style for more. "Intense Slope Style Central"

  6. #6
    mtbr member
    Reputation: OneBikeGuy's Avatar
    Join Date
    Nov 2006
    Posts
    765
    Quote Originally Posted by ixi
    Yep, I have an extra set of what you need. I sent you a PM.


    I want exactly like that but for 1.5.
    Full filled with 6.6 then migrating to Slope Style for more. "Intense Slope Style Central"

  7. #7
    Boyeeee
    Reputation: BCBlur's Avatar
    Join Date
    Nov 2004
    Posts
    939
    Quote Originally Posted by OneBikeGuy
    I want exactly like that but for 1.5.
    It's been a while, but I just received the parts to convert my FSA Orbit Xtreme headset from a 1 1/8 to 1.5 from the guys at Competitive Cyclist via special order.

    The parts numbers are as follows:
    FSA #160-2008 Topcap and starnut
    FSA #160-5463 Crown Race
    FSA #160-7639 Compression Ring
    FSA #161-4495 Upper Bearing Cover.

    Total cost was $45 after shipping.

    I emailed a few shops and FSA and the guys at CC were the only ones to come through. They're highly recommended.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •