Hi there! I have an 09 Mojo with a stock RP23 on it. I purchased an
RP2 with the same eye to eye and stroke for a different bike and ended up not using it.
The tune on the RP23 says low compression and low rebound.
How would the ride be affected ** the new RP2 with the following
settings: Velocity tune Low, rebound tune Medium, boost valve pressure of 200.
I know the low compression/low velocity tune are the same. It is the
boost valve that I was curious about and changes it might make for the
bike. Thanks for any advice!
Results 1 to 1 of 1
Thread: Older rp23 vs new rp2 on mojo
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »