Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation:
    Join Date
    Jun 2010
    Posts
    6

    Steerer Tube Length Haro Flightline Comp

    I have a 22" frame Haro Flightline Comp and am interested in upgrading from the Dart 2 Fork. What length fork steerer tube do I need to order?

    Thanks
    BJ

  2. #2
    mtbr member
    Reputation:
    Join Date
    May 2010
    Posts
    13
    It should come with a set length if you are buying new, you need to trim it down to the same length as your current one or get a bike shop to fit for you, it wont cost much.
    If you are buying secondhand then check the forks being offered have one that is as long or longer than the one you have.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jun 2010
    Posts
    6
    I am looking at purchasing an OE take Tora from Jensen and am not sure which length to buy. Any help out there???????

  4. #4
    mtbr member
    Reputation: downhilljill's Avatar
    Join Date
    Apr 2005
    Posts
    1,820
    Like Curlie said, if this is a new fork, it will come way longer than you need it. You cut the steer tube down and re-install a star nut to fit your bike.

    If the Tora fork is a new take-off fork (meaning it's already been installed on a bike) or if it's a used fork, your best bet will be to measure the steer tube length on the Dart that's on the bike now. If the new fork is at least that long, you are good to go.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •