Hoping someone out there can help out this newbie. I recently bought a '10 GT Sensor 2.0 on ebay and the guy shipped me a strange bag of miscellaneous parts that apparently are for mounting the front wheel since the rest of the bike is properly assembled. The parts I have left are two 15mm bearings, a thin 15mm ring, a black dust-cap/spacer thing, and of course the 15mm thru-axle. He gave me some complicated instructions for mounting the wheel but it just doesn't line up properly, not to mention there is still wiggle room along the axle when it is fully threaded and locked. LBS confirmed my suspicions and thought there should be two of the black caps, one for each side of the wheel.
So please, if anyone has or had this bike could you tell me how your bike came as far as parts on the front wheel required for mounting. Also if you wouldn't mind, some close up pictures would be a huge help.
Thank you in advance!
Results 1 to 3 of 3
Thread: HELP! 2010 GT Sensor 2.0
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »