Results 1 to 9 of 9
  1. #1
    mtbr member
    Reputation: mrjustin007's Avatar
    Join Date
    Jul 2008
    Posts
    292

    1992 GT Richter 8.0 Help

    Looking for source for a derailluer hanger, front derailleur size and size for seat collar.
    Thanks!!

  2. #2
    What could go wrong ...
    Reputation: Zoke2's Avatar
    Join Date
    Nov 2007
    Posts
    1,966
    try http://derailleurhanger.com/ and you can have the LBS measure for the seatpost clamp size and derailleur clamp size
    I used to ride to Win ... Now I ride to Grin

    While my guitar gently weeps, my bike sits there mocking me

  3. #3
    mtbr member
    Reputation: gm1230126's Avatar
    Join Date
    Nov 2005
    Posts
    2,937
    Quote Originally Posted by mrjustin007
    Looking for source for a derailluer hanger, front derailleur size and size for seat collar.
    Thanks!!

    If a 92...you need the derailleur hanger with the small finger that sticks up? If so retro supply on eBay has them listed for around 25. It's a steel frame so the front derailleur size is 28.6mm as is the seat collar. Hope that helps......need a picture?
    Attached Images Attached Images
    Needed: 26.8mm XTR seatpost, blue GT/Grundig Jersey.

  4. #4
    mtbr member
    Reputation: gm1230126's Avatar
    Join Date
    Nov 2005
    Posts
    2,937
    If this pic (lower right corner) is what you need for the hanger...retro supply on ebay. Derailluerhanger.com doesn't stock this one....unless they just added it....I've been telling Wheels Mfg for four years that they should start making it.
    Attached Images Attached Images
    Needed: 26.8mm XTR seatpost, blue GT/Grundig Jersey.

  5. #5
    mtbr member
    Reputation: mrjustin007's Avatar
    Join Date
    Jul 2008
    Posts
    292
    Thanks GM - that one on the Bravada looks right. At $25 that hanger is more than I paid for the frame.

    question: Is there some kind of yoke for the front derailleur cable?
    Last edited by mrjustin007; 01-08-2009 at 08:03 AM.

  6. #6
    mtbr member
    Reputation: gm1230126's Avatar
    Join Date
    Nov 2005
    Posts
    2,937
    yes there was but they are near impossible to find. It fit between the seat tube and the bridge... just use plastic cable noodle and make sure the cables not hitting the paint. That's the way I have my Psyclone set up....it works fine.
    Needed: 26.8mm XTR seatpost, blue GT/Grundig Jersey.

  7. #7
    mtbr member
    Reputation: mrjustin007's Avatar
    Join Date
    Jul 2008
    Posts
    292
    Is the plastic cable guide for the u brake the same thing? I have one from a Karakoram, but the Karakoram is pre-groove tube.

  8. #8
    mtbr member
    Reputation: kikaha's Avatar
    Join Date
    Feb 2007
    Posts
    116
    one of my gt faves...................


  9. #9
    mtbr member
    Reputation: mrjustin007's Avatar
    Join Date
    Jul 2008
    Posts
    292
    Quote Originally Posted by gm1230126
    It's a steel frame so the front derailleur size is 28.6mm as is the seat collar. Hope that helps......need a picture?
    Would the seatpost be 28.6?
    WTB: Bontrager Comp Fork & Syncros metal top cap

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •