Page 2 of 2 FirstFirst 1 2
Results 26 to 29 of 29
  1. #26
    mtbr member
    Reputation: adarn's Avatar
    Join Date
    Aug 2009
    Posts
    308
    Cool, I'd love to see pics if you can figure out the posting thing!

  2. #27
    mtbr member
    Reputation: Eric Malcolm's Avatar
    Join Date
    Dec 2011
    Posts
    523

    Adarn, better late than never.

    Name:  IMG_0255.JPG
Views: 247
Size:  33.4 KB

    As shown, it is pretty much a mirror image of the original.

    Eric
    If I don't make an attempt, how will I know if it will work?

  3. #28
    Most Delicious
    Reputation: dr.welby's Avatar
    Join Date
    Jan 2004
    Posts
    1,034
    Quote Originally Posted by Eric Malcolm View Post

    As shown, it is pretty much a mirror image of the original.
    Does that actually work? Seems like the attachment point can only move a few mm upwards. As my brain is processing it, you don't want a mirror image, you want to flip the input arm 180 degrees, which puts it just above and outside the lower pivot for the cage.

  4. #29
    mtbr member
    Reputation: Eric Malcolm's Avatar
    Join Date
    Dec 2011
    Posts
    523
    Yes, I know what you are pointing out. You can do it that way (180 degrees) as long as the movement allows clearance with the crankarm. With this one, I intend to cable it from a low position on the seat tube. This modification does require a bit of thinking through in this respect. You need to to draw it out and measure, measure, and measure again. A problem teaser for sure.

    Eric
    If I don't make an attempt, how will I know if it will work?

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •