Results 1 to 5 of 5
  1. #1
    mtbr member
    Reputation:
    Join Date
    Jun 2008
    Posts
    126

    Will ClownShoe fit on Mukluk?

    Looking to change out my darryls to drilled clownshoes, just wanted to know if this setup will work or if anyone has done it? and any issues with it if you have done it? thanks

  2. #2
    mtbr member
    Reputation:
    Join Date
    Aug 2008
    Posts
    1,300
    Which Mukluk and which crankset?
    Latitude 61

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jun 2008
    Posts
    126
    2010 mukluk, e13 crankset, running 1x9

  4. #4
    mtbr member
    Reputation:
    Join Date
    Mar 2004
    Posts
    329
    I have a Muk3 with the e13 crankset with BFLs on Clownshoes, and I have chain rub on my lowest three gears when on the granny up front. I assume you have your chain ring for your 1x9 in the middle position, which should give you very minor to no rub at 1-1, as I am rub free on what would be 2-2, as I removed the 12T from my cassette and put a spacer behind it. Just dish the rim a little to the non-drive side, and you should be good. And any tire smaller than a BFL should be good.

  5. #5
    mtbr member
    Reputation: Johnclimber's Avatar
    Join Date
    Jan 2008
    Posts
    451
    Fit's the front ok

    Moses parting the waves by Johnclimber, on Flickr

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •