So I got x0 shifters to replace my x5 shifters. Both are 3x9 and I have a x7 on the rear and shimano on the front. First off I cant find a good diagram of how to properly rout the cables so not sure if that is done correctly. Besides that I cant seem to get the front dialed in. I can either get it to shift the top 2 gears or the bottom 2 gears but not all 3. I have messed with cable tension and barrel nuts as well as set screws. Any suggestions. I really dont want to have to pay a lbs to do somethign I should be able to.
Mtbr's 2016 Winter Biking GearReviews and Roundups
Results 1 to 3 of 3