Results 1 to 6 of 6
  1. #1
    mtbr member
    Reputation: dosboy's Avatar
    Join Date
    Oct 2006

    rohloff wheel builder

    Who builds/ has the most experience in building 29er wheels with rohloff hubs and has good prices? anyone have any experiences they could share with me? I need a speedhub disc quick release laced to a stans ztr 355-nay info would be most appreciated--

  2. #2
    ups and downs
    Reputation: rockyuphill's Avatar
    Join Date
    Nov 2004
    I had build my 26" Rohloff wheel, that was about 3 years ago and I haven't had to true it or tweak it yet. I'm sure they can do just as well with a 29" wheel. If you're on the other side of the country Harris Cyclery is a major Rohloff source.

  3. #3
    mtbr member
    Join Date
    Jul 2006

    shouldn't be a problem

    I believe the Rohloff actually simplifies the build, so any competent wheel builder should be okay. The guys at webcyclery are supposed to be good, I used a local shop out here in CA.

    good luck.

  4. #4
    ridin' Mary
    Reputation: OhNooo's Avatar
    Join Date
    Jan 2007
    I had mikesee build mine up. I would highly recommend him

  5. #5
    Music & Bikes
    Reputation: fokof's Avatar
    Join Date
    Apr 2006
    It's very easy to build a wheel with this hub.
    With a Mavic 717 , you need 240mm spokes , both sides.

    Second years with my wheel , stronger than my Crossmax.....

    EDIT ; thats for a 26" wheel
    Last edited by fokof; 06-20-2007 at 04:59 PM.
    "There is a big difference between kneeling down and bending over" -FZ

  6. #6
    mtbr member
    Join Date
    Jan 2004
    I second the mikesee recommendation.

Members who have read this thread: 1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts