Results 1 to 4 of 4
  1. #1
    I'm a bottom feeder...
    Reputation: CARP's Avatar
    Join Date
    Apr 2006
    Posts
    156

    raceface diabolus crank ??? Please help!!!

    Hello All-- I have above said crankset and I have no problem getting the drive side arm off using the dustcap as a crank puller but how in the heck does the non drive side come off??? Once I remove the drive side, the non drive side seems like it doesn't want to come out of the BB shell. Any help would be greatly appreciated.

  2. #2
    Meh.
    Reputation: XSL_WiLL's Avatar
    Join Date
    Nov 2004
    Posts
    17,516
    Give the spindle a smack with a rubber mallet from the driveside. And then it should just pull out. There are too rubber o-rings that sit pretty tight on the spindle.

  3. #3
    I'm a bottom feeder...
    Reputation: CARP's Avatar
    Join Date
    Apr 2006
    Posts
    156

    Thanks...

    Thanks... XSL_WiLL I wanted to do that but I thought I'd ask before trying to force someting. The instructions don't really give a good explaination of removing the crankset other than reversing installation... Anyway thanks again and I'll let you know how I make out... CARP

  4. #4
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    7
    how do you pull off the drive side crank?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •