Mountain Bike Reviews Forum banner

race face turbine

924 views 10 replies 8 participants last post by  f3rg 
#1 ·
I found these the other day and was wondering if anyone could tell me the BCD for them I was thinking of using them in a 1x9 or 2x9 setup on a bandersnatch build.
 

Attachments

See less See more
1
#7 ·
I am glad I kept these then. I used them on a One 9 build that I did last year. The SS full rigid just wasn't my thing, but this was one of the few parts that I kept. Totally forgot I even had them, but found them tucked away in the back of garage.

Just need to find a 20x30 chainring that will work
 
#9 ·
Take a look at Middleburn

41ants said:
I am glad I kept these then. I used them on a One 9 build that I did last year. The SS full rigid just wasn't my thing, but this was one of the few parts that I kept. Totally forgot I even had them, but found them tucked away in the back of garage.

Just need to find a 20x30 chainring that will work
Can take a look at Chain reaction or one of the guys below. Chain reaction can be hit or miss with their stock. I bought some rings from them, and a week later they had the OTHER set I wanted.

USAMTB Tandems Inc
3180 Deercreek Drive Canton GA 30114
tel: +1 678-445-0711
www.mtbtandems.com sales@mtbtandems.com

Rotec Cycles 16897 Copper Mountain Rd Monroe WA 98272
tel: +1 425 220 8663
www.roteccycles.com

Speedway Cycles 2600 Spenard Anchorage AK 99503
tel: +1 907-222-1967
www.speedwaycyclesak.com

Good luck,

JmZ
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top