I received my new in the box 2013 Atlas crankset and everything appears to be good, and all spacers are included.
My trouble is this; all the 1mm spacers are installed on the spindle/axle tight to the non-drive side arm.
Iíve given them a good going over with my fingers but for the life of me cannot budge them free. I need to remove them and am considering using a knife to separate them one at a time, or, using a set of pliers to spin them on the spindle in hopes of breaking them loose.
Any tips or advice would be greatly appreciated.
Results 1 to 3 of 3
Thread: Race Face Atlas install help.
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »