Ik bought an Middleburn RS7 crank that I want to use with a 2x10 (Shimano shifters, front 24x36 and rear 11x38) setup. I have seen some stories that the Middleburn chain rings are not compatible with a 10 speed setup and causing chain suck. Also CRC only sells the Middleburn rings with a note, only suitable for 9-speed. The Middleburn website does not mention this restriction (but they don't answer emails regarding this issue)
I want to keep using the Shimano XTR shifter and derailleurs.
Can I use Middleburn chainrings, with or without some modification or are there good alternatives? I am thinking of Blackspire Chainrings.
Results 1 to 1 of 1
Thread: Middleburn RS7 with 2x10 setup
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »