just finished building my 00 rm hammer race into a single speed...
last step was pulling the cranks and pulling all but my middle chainring and reassembling.
so now i got some major creakage in the bb/crank/chainring area... chainring bolts are freshly greased.
could i have over torqued the crank/bb interface when i slapped 'em back on? i just used a allen wrench and cranked till it felt tight?!?!
its a pretty consistent creak all the way around the pedal stroke. this is definately a new creak as i was riding it in ss mode with the big and middle rings intact for a couple rides with no creak and now, after pulling the cranks and the big ring, it sounds like a dying vulture.
Results 1 to 1 of 1
Thread: different bb/crank creak...