I am building a bike after about 6 years off from building. When installing an ES70 bb into the frame, the splined spindle on the drive side sticks slightly further from the frame than the non-drive side. This is not the case on other bikes of mine, but...
A. Does this sound OK, generally?
B. What does this do to the chain line to the cassette?
It is a 1 x 9 setup if this helps at all. Thanks. GNR
Mtbr's 2016 Winter Biking GearReviews and Roundups
Results 1 to 1 of 1
Thread: Another noob question