Results 1 to 5 of 5
  1. #1
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    23

    IF Deluxe stock geometry question

    Hi all,
    I have a newish to me '05 18 inch stock geometry steel Deluxe SS. Set up with a stock IF rigid fork. Is there anyway to tell if the bike will take a suspension fork without messing up the geometry? And if so. If it needs an 80 or 100mm? Yes I know, sacralige to most of you.
    Any help appreciated.


    Thank you,
    John

  2. #2
    mtbr member
    Reputation:
    Join Date
    Dec 2007
    Posts
    126
    You might find more answers on ifrider.com. Register your bike and join the madness . Its a website just for IF owners. I bought mine new, so the fork was already figured into the build.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    23
    Thanks, I'm hooking up there now

  4. #4
    holding back the darkness
    Reputation: subliminalshiver's Avatar
    Join Date
    Jan 2007
    Posts
    1,711
    You could just measure the axle-to-crown of the fork you currently have, and the offset and see where that compares to the suspension fork you're looking for. Probably the easiest way.

  5. #5
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    23
    Quote Originally Posted by subliminalshiver
    You could just measure the axle-to-crown of the fork you currently have, and the offset and see where that compares to the suspension fork you're looking for. Probably the easiest way.


    Sounds good, thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •