Results 1 to 1 of 1
  1. #1
    mtbr member
    Join Date
    Jan 2006

    2005 ram xt 3500 question

    Hi there,
    Its good to see a couple of these lovely Raleigh bikes still knocking around! I think I might have the only one in Ireland, which is nice!

    My current setup:
    I use the bike more for DH/FR and currently have a 24" wheel on the back and a 7" Boxxer running on the front. The rear is currently set to 6".
    The 24" wheel is not going to switched for a 26", as I really can't shift the bike with that geometry.

    Anyway, my questions are:
    Does anyone know if this will put too much stress on the frame in its current setup?
    I am looking to put an old 7" Monster T on instead of the Boxxer, but is the frame strong enough to cope with the weight/angles?
    Does it matter if the rear is running at 6" or 7" with the 24" wheel and the 7" fork?

    Thanks for your answers in advance, I'll gladly answer anymore questions.
    Last edited by Norbert; 01-05-2009 at 05:25 PM.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.