Results 1 to 2 of 2
  1. #1
    mtbr member
    Join Date
    May 2007

    Commencal Meta 5.2 Lateral Stiffness


    Just wondering if anyones had any issue with the lateral stiffness of the Commencal Meta 5 frame. I have the 2006 5.2 and there seems to be quite a bit of flex left and right when the wheel is loaded.

    I have checked the pivot points which all seem clean and tight. The main source of flex seems to be from around the hub/wheel. I read a couple of posts suggesting the the QRs on the 5.2 are a bit ropey - and I would definitely agree with this.

    Has anyone replaced the QRs and improved this situation?

    Has anyone tried a 16mm thru axel hub on the 5.2 to solve this issue?


  2. #2
    PDB is offline
    Reputation: PDB's Avatar
    Join Date
    May 2006
    It seems that some of the 06's did not ship with the main pivot properly tightened. (no issues with 07) - you may want to check the pivots before the bearings get tweaked and need replacing.
    This *may* be the issue you are experiencing. My 07 is pretty darn stiff (I'm a DH'r, so that of importance to me). I've not ridden the 06's so I couldn't tell you if the rear end felt different.
    Want to go green? Want to be low impact?
    Buy 2nd Hand Products!

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.