Results 1 to 2 of 2
  1. #1
    mtbr member
    Join Date
    Feb 2010

    Talas 180 RC2 setup for 250lb, 6'6" rider...Help!

    Trying to set up my Talas 180 RC2. Any other riders out there who are tall and heavy who have this fork? Would love to know what your settings are (pressure, HS & LS compression and rebound.) Thanks so much. It's a 2012 on a Mojo HD.

  2. #2
    mtbr member
    Join Date
    Oct 2007
    Since no one else has replied I will pass my TALAS settings. I'm on a 29'er TALAS so it's not exactly the same as yours, but it might be some help. (I only have 125mm of travel, not your 180.)

    I'm 225 lbs and 6'4". I set the pressure to 125 psi which gives me ~25% sag. (go with the sag for your bike, not my pressure) I started with the both damping at the middle setting. Over time I have increased both by 1 click. The damping changes are really personal preference. Your bike and the type of riding you do will probably change the damping you prefer.

Similar Threads

  1. recommend a good handlebar stem setup for a 6'4" cannondale rider
    By dairyman in forum Clydesdales/Tall Riders
    Replies: 2
    Last Post: 03-28-2011, 11:32 PM
  2. What is needed to set up a DUC32 for a 250lb rider?
    By Datalogger in forum Maverick
    Replies: 6
    Last Post: 09-06-2008, 01:02 AM
  3. 250lb 6'.2" MTN Bike Recommendations $1000
    By linusv in forum Bike and Frame discussion
    Replies: 4
    Last Post: 06-23-2007, 09:36 PM
  4. Bike advice - 6'4"/250lb rider
    By Nvr Fnsh in forum Beginner's Corner
    Replies: 5
    Last Post: 08-18-2006, 07:42 AM

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.