Mountain Bike Reviews Forum banner

Help Cannondale Scalpel 2005

3K views 5 replies 3 participants last post by  akivrx 
#1 ·
Wheel Bicycle tire Bicycle wheel Tire Bicycle wheel rim

Bicycle part Bicycle drivetrain part Crankset Bicycle chain Bicycle accessory


I have a 2005 Scalpel with a Shimano Xtr 960 crankset and I want to install a FSA crankset.

Bicycle part Line Bicycle drivetrain part Font Crankset


FSA K-Force Light 386 BB24 MTB Crank set 175mm 42 / 27

Model: K-Force Light
Teeth: 42/27
Length: 175mm
Q-Factor: 168mm
BCD: 86mm
Chainline: 49.5mm
Available for all 9 and 10 speed systems
FSA BB24 type BB included


I bought on EBay this crankset and took it to a workshop to install.

Bicycle part Bicycle accessory Bicycle wheel rim Bicycle Bicycle tire


But the workshop sent me this image saying that it is impossible to use this crankset because the crank set Shaft is very long ....

Is there any adapter or BB type is wrong?

Please help me.
 
See less See more
4
#6 ·
Thanks for the help, I sent this link http://www.mcsteam.com/upload/kforce_light_install.pdf and asked if he installed more spacers in BB.

Pipe Steel Plumbing fitting Household hardware Tool accessory

The answer was that they installed 3 spacers (did not report the thickness) on the side of the drive in the BB 68 >>> 73 and when inserting the crank even without squeezing it on the surface ...

The workshop recommended me to use this new BB and install the old XTR crank on the bike ....

The workshop told me that since it is not possible to install more spacers in BB, if it has to use wave washer and spacers in the Shaft outside BB and they can not acquire for this model of crank.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top