Free stuff or trade for your Norcal friends?

[digthemlows]

Have:
eThirteen DRS dual guide system (up to 36 teeth)
Hussefelt stems 40and 60mm 1 1/8” 31.8mm
Kenda Nevegal DH Wire Bead 2.5 good tire with some tread left.
Avid BB5 mechanical brakes with 160mm rotors
Avid Juicy pads (new)
Trashed Ryno Lite rear wheel (disc)…needs spoke replaced and truing

Want:

Spacers for rear wheel (ss application)
19t cog (preferably not a steel stamped cog)

have the spacers and need to verify the cog, it may be 18t. I'm intersted in the 40mm stem and am in Sacramento...........where are you?

[TC]

i'm in pacifica, work in SF.
let me know what that cog looks like (brand, teeth count and condition) and we'll figure something out (shipping, etc...)

tc

[Stripes]

Want:
- 26" Maxxis Minion 2.35 DHF, both hard compound or soft (newer condition for soft, more used for the harder compound ok)
- $$$

Have:
- 26" 2.35 Kenda Small Block 8, used a handful of rides, mostly at the dirt jumps at Cali
- 26" Weirwolf LTs 2.55, used a handful of rides
- 7.87 x 2.25 CCDB with 450 lb spring (brand new)

[digthemlows]

18t and spacers and lockring....

my phone made this

[FSR831]

Does anyone have a short stem they do not need?
I am in Santa cruz

[pimpbot]

I have a Bianchi Cyclocross fork with an 8" 1 1/8" steerer tube. Cantilever bosses, carbon fiber legs, alloy steerer tube. It's 1/2" too short to fit my frame. I really need one around 9.5" to get the proper bar height. Looking to trade for equivalent fork with longer steerer tube and a few bucks/beers/other parts. Mounted, but never ridden. Very minor scuffs from rattling around in the trunk of my car for a few weeks.

[wreckedrex]

I've got a large blue GF Aquilla frame I'd like to get out of my garage, It's probably a '99 give or take a year or so. (steel, v brake studs, 1.125 head tube, came with a 100mm fork) I'd happily trade it for a sixer of something tasty.

I've also got a black 18" Performance Access frame knocking around. No idea what year anymore, maybe 06 or 07? (aluminum, disk and rim brake bosses) I'd let it go for 2 sixers of something tasty.

[FSR831]

I've got a large blue GF Aquilla frame I'd like to get out of my garage, It's probably a '99 give or take a year or so. (steel, v brake studs, 1.125 head tube, came with a 100mm fork) I'd happily trade it for a sixer of something tasty.

I've also got a black 18" Performance Access frame knocking around. No idea what year anymore, maybe 06 or 07? (aluminum, disk and rim brake bosses) I'd let it go for 2 sixers of something tasty.

Interested in the Performance access frame, do you have a pic?

[pimpbot]

Interested in the Performance access frame, do you have a pic?

Great frame. Nothing laid down gofast power like that bike... and it didn't rattle my teeth out like other hardtails I've owned.

[FSR831]

Great frame. Nothing laid down gofast power like that bike... and it didn't rattle my teeth out like other hardtails I've owned.

Oh cool, I don't know much about them; just that I miss my old hardtail! I was riding a Norco Rampage which was very stout and HEAVY. Looking for something a little more forgiving.

[wreckedrex]

Interested in the Performance access frame, do you have a pic?

I've got a crappy old phone pic of it here, I can snap a nicer one this evening if you're interested. It weighs about 3.7 lbs with the headset in it and it's in pretty decent shape. Only rode it for a year or so before I swapped the parts over to a different frame.

[pimpbot]

Oh cool, I don't know much about them; just that I miss my old hardtail! I was riding a Norco Rampage which was very stout and HEAVY. Looking for something a little more forgiving.

.. here's the pic of mine from Boggs 8 hour back in like 2005 or so. I had it built up to 22.5 pounds using cheapo parts. I think I had less than $500 into the whole thing, all built with stuff lying around my parts bin, craigslist and swap meet parts.

[akacoke]

i have a set of mavic 823 with shimano xt rear hub, no name 20mm front hub. they are new old stock with some nicks and scratches, shows signs of mocking up on a frame but no cassette or discs were ever installed.

im looking to trade , mavic 729 wheelset , sun doubletrack, sun mtx39, alex dx32, intense mag 30. rear hub 135mm axle dont matter. front 20mm or 9mm

otherwise sell for $150 pictures are in here 2007 Mavic 823 Tubeless Wheelset 20mm shimano XT-M756 Hub - Pinkbike

thanks

[FSR831]

I've got a crappy old phone pic of it here, I can snap a nicer one this evening if you're interested. It weighs about 3.7 lbs with the headset in it and it's in pretty decent shape. Only rode it for a year or so before I swapped the parts over to a different frame.

Sweet man, I am definitely interested in trading you for it!

[JeepDave]

I have a
straight 27.2 black Thomson post cut to 330mm
XTR V-brakes front and rear

Looking for a laid back post of similar quality, same size & length. I'm also looking for a set V-brake levers of XTR or similar quality.

In San Jose

[AnonymouseTech]

Would anyone around Santa Cruz or the South Bay be interested in trading my Surly Open Bar for some sort of low rising 27" - 28" bar?

[markj2k4]

Looking for:
Selle Italia slr saddle (xp, regular, gelflow - doesn't matter)
Fox 100mm fork disc only preferably white or OE black - decent shape

Have:
2010 Fox f-series 80mm fork
2007 rockshox SID (80mm) with lockout
Easton EC70 flat bar (uncut - carbon - no crashes)

tons of other stuff I will post later.

[Ben_Im]

Have:

175mm Specialized S Works Strong Arm crankset with bottom bracket.
104BCD Salsa 34t Chainring

Photo:



Want: 4 Pack of Dogfish head

[JHANguyen]

Anyone have an extra 31.8 riser bar? As long as it's wider than 24", I should be good. Nothing fancy. For the old man's bike...


Also, I have a 52cm Redline Conquest w/ Campagnolo Centaur group. Interested in trading for a 29er HT or a road bike.

[pimpbot]

I have a Niner One9 Scandium frame, Large.

I'm looking for a decent 56cm/Large cyclocross frame with a carbon fork. Trade-zies?

[stumblemumble]

Have: Works Components 1 degree angleset for 1 1/8 HTs. Also have a blackspire stinger BB mount and 32t BBG bashwich setup.

In Santa Rosa. Up to trade...let me know.

[AnonymouseTech]

Would anyone around Santa Cruz or Southbay happen to have a stem off of a 2012 GT Avalanche 3.0 Disc or something spec'd like it? I'm also looking for handlebars around 27"-28". I'm trying to get my SS to have similar steering feel to my Avalanche. I'll gladly take GT Avalanche handlebar and/or stem take-offs. My SS also needs stickier pedals than the Kona take-offs I have on it right now.

I have:
- Surly Open Bar
- Stock Monocog cranks
- 36t SS Salsa chainring, black
- 20t cog aluminum
- 18t cog aluminum
- titec bar ends
- some old worn lock on grips which I don't know the brand or model
- stock v-brakes off of my Monocog, Tektro comes with levers and cables
- cash monies

[tppon]

Anyone have center lock to 6 bolt adapters
Laying around? Or interested in a rotor swap?
Thanks!

[Leopold Porkstacker]

I’ve got a few used cassettes for trade (beer) if anyone is interested. I’ve got a Shimano HG-something-something 11-34, a SRAM gold/orange anodised 11-34 with three teeth missing (on the 13t and 17t cogs), and a lightly used cobbled together SRAM PG950 or 970 (don’t remember now) that has hardly any use since I swapped some of the cogs out to make a 11-26 DH cassette a 11-30 for my son’s bike. See pictures for wear details. PM me if you are interested in any of these items.

Shimano (left) and SRAM (right):


Shimano and SRAM (business side):


Cobbled mismash of cogs—a complete cassette:


And the underside of the above:

[AngelsAndBombs]

Anyone have any comfy saddles for sale/trade?