Page 4 of 37 FirstFirst 1 2 3 4 5 6 7 8 14 ... LastLast
Results 151 to 200 of 1804
  1. #151
    mtbr member
    Reputation: Jasone510's Avatar
    Join Date
    Oct 2008
    Posts
    256
    Looking to trade my 08 Pike 426 Coil U-Turn for an 09 Revelation Dual Air w/ Maxle. The Pike has been on no more than 10 rides total, each ride being 10 miles (give or take a mile). Steerer tube has been cut to 8". Will be willing to add cash depending on the condition of the Revelation.

    I also have the Medium and X-Firm springs, which will come with the fork.

  2. #152
    Obi
    Obi is offline
    mtbr member
    Reputation: Obi's Avatar
    Join Date
    Oct 2005
    Posts
    4,272

    Idea!

    Quote Originally Posted by zorg
    Old 12 speed 52cm steel roadie that I inherited from fellow MTBR member with downtube shifters. Bike has been cleaned up (mostly) and tuned up. Rear hub could use a lot of TLC. Also got a set of tubular Mavic wheels from 80s in mint condition. I don't ride road so might as well go to a home that wants it. Would make a decent commuter.

    Looking for a rear derailleur and shifter for the MTB.
    JC, still have that road bike, because I still have stupid gearie parts laying around the garage. I want something I don't care about if I'm gonna commute and risk it getting stolen.

    Aside from JC, for everybody else I need to clear out the garage pretty quick so I can raise funds for the bambino come December and my graduate classes this Fall..

    So, obviously cash preferred, I'm not looking to make a killing here unless you want to offer up something we need right now.

    *SingleSpeed 650B wheelset from Sweet Pea..Surly Hubs on Velocity Hoops, DT Swiss Spokes HandMade Zero Dish Build-Used Once
    **or Sweet Pea Complete best offer (Our 14" Surly 1x1 Green Commuter Bike)


    *Chris King 1-1/8" SteelSet Headset shaved down to 3/4" Depth Use


    *Thule:

    ~M.O.A.B. Basket

    ~Pair of Viper Rails

    ~52" Crossbars

    ~Gutter Mounts

    ~Non Gutter Mounts (w/ 89-95 4Runner pads..you buy w/e pads your vehicle needs)[/U]

    ~8-10 pack locks same key/lockset

    ~4 pack key/lockset

    *Lincoln Electric

    ~220v Stick Welder-used once and collecting dust..I got a Mig instead.

    *Other camping and fishing goodies, *Non Bike Related unless you like going camping and riding like we do.. :

    ~Kelty Low-Temp Double Bag (Red)(unopened)

    ~LowRance Classic Green Box 9volt Fish Finder (collectible/complete)

    ~Pots/Pans/SilverWare Some Alloy, Some Cast Iron

    ~Classic Steel Red Coleman Cooler (*Free..still needs restoration)



    PM me w/ the item wanted and a decent offer. On the Thule Stuff, I'm willing to offer up everything as a comlpete kit but the price has to be a minimum amount.
    Goodbye Monkey and Thanks For All The Laughs and Inspiration - "Wrenches Flying Man!"

  3. #153
    Paper or plastic?
    Reputation: zorg's Avatar
    Join Date
    Jul 2004
    Posts
    8,712
    Sorry the road bike is gone
    Faster is not always better, but it's always more fun

  4. #154
    PCC
    PCC is offline
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    1,081
    Quote Originally Posted by obionespeedonly
    because I still have stupid gearie parts laying around the garage.
    Whatcha got?

  5. #155
    Obi
    Obi is offline
    mtbr member
    Reputation: Obi's Avatar
    Join Date
    Oct 2005
    Posts
    4,272
    Quote Originally Posted by PCC
    Whatcha got?
    Droolworthy 8 speed stuff, some unused SRAM stuff, Chain Guides, other odds and ends from a couple of cancelled projects since going to singlespeed or internal hub and some other odds and ends in about two or three "milkcrates".

    Sweet pea would make a sweet project bike for someone wanting to be able to switch things around. Just pick yourself up a 26" mtb disc wheelset and/or a fork and goto town. (*Don't use the 650's on a 26" suspension fork though, most companies won't warranty/liability cover if you do so.)
    Goodbye Monkey and Thanks For All The Laughs and Inspiration - "Wrenches Flying Man!"

  6. #156
    menace to myself & others
    Reputation:
    Join Date
    Aug 2005
    Posts
    362
    HAVE: rear Cane Creek 26" disc wheel. Also some misc 26" tires, various conditions. Wide-@ss EA-50 low-rise bars. miscellaneous road bars, chainrings.

    WANT: reasonably light 700c front road wheel. Maybe: 1 1/8 threadless headset, 29er tires, Reba pop-lock kit. Torque wrench. 12-27 9-speed cassette. 8 or 10 speed chains. XT Cantis.

    Open to other stuff, if you really want something I've listed.

  7. #157
    otb member
    Reputation: craigshaf's Avatar
    Join Date
    May 2007
    Posts
    330

    Old Steel Frames?

    I'm starting a welding class as SF State. Would like to do some projects with old bike frames. Got any? Cruiser frames would be sweet, but I'm down to grab anything you have.
    The wheels on my bike go 'round and 'round

  8. #158
    Paper or plastic?
    Reputation: zorg's Avatar
    Join Date
    Jul 2004
    Posts
    8,712
    Got a set of Kenda K-Rad 26x2.3 tires, like new (used only a few miles). They are street DJ tires.

    I also got a set of 20x1.95 street BMX tires. One tire is good, the other one is so so.

    I need some BMX crankset for an older Mongoose.
    Faster is not always better, but it's always more fun

  9. #159
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    62
    still got my Kenda Nevegal 2.35 ( 1 DTC / 1 Stick E) for sale

    a bit worn out, but first $20 gets it. pick up near san leandro bayfair mall

    PM ME if interested

    heres my craigslist ad CLICK HERE

  10. #160
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    62
    I also just put my BRAND NEW IN BOX (never mounted) thomson masterpiece seatpost

    30.9 x 350 .. first $140 in cash gets it

    Click here for my craigslist ad

  11. #161
    kpd
    kpd is offline
    mtbr member
    Reputation: kpd's Avatar
    Join Date
    Jan 2008
    Posts
    541
    I'm looking for a rigid 29er fork-- gotta represent MTB pride on the cyclocross courses this fall. It should be suspension corrected (A-C of about 470 mm), and have a large offset (bike is built around 52 mm, but 45 mm or more should work). I'd prefer post mounts, and don't need a lot of steerer tube. I'm open to carbon, Ti or steel.

    Things I have:
    Cash
    New WTB LaserDisc XC wheelset
    New carbon riser bar
    Used Avid Juicy Ultimate brake (needs assembly, paint damaged by DOT fluid)
    Used Bontrager carbon crankset
    Other junk I can't remember...

  12. #162
    mtbr member
    Reputation:
    Join Date
    May 2005
    Posts
    1,540
    What Carbon bar you have? I don't have anything related to rigid forks but playing with idea of putting new bars on Mojo.

    Also I'm looking for Tune SpeedNeedle (Marathon version preferable)

    I finally got R1 brakes (great stuff) so Mono Minis '06 fully rebuilt few month ago (new seals, new fluid) are going to market (no rotors offered).

    I still have cheap V-brakes wheels, XCL HT frame 14", Shimano Deore cranks (octalink), Truvative ISIS DH cranks and bunch of other stuff that would be good to build complete entry level MTB except for the fork.
    I used to run tubes like you are, but then I got thorn in my wheel.

  13. #163
    mtbr member
    Reputation: metrotuned's Avatar
    Join Date
    Dec 2006
    Posts
    1,756
    Trade:

    Have:

    WHEELSET
    Salsa Delgado Disc / DT Swiss Competition spokes / DT Swiss brass nipples / Atomlab Single Speed Disc Hubset Bolt-On, 36H, 4X, low miles, black on black on black. Red accents in decals and silkscreen logos. Low mileage, like new, hand laced. Perfect for a White Industries ENO freewheel (not available).

    BRAKES
    2008 BB7 (black), with Speed Dial Ti brake levers in ano titanium color, black levers. Jagwire kevlar cables - fit 20" large bike. Low mileage, like new. Includes 160mm or 185mm IS/post mount adaptors of choice. 160mm or 185mm roundagon rotors.

    HANDLEBAR
    Ritchey Rizer Comp handlebars Lo-Rise black 31.8 OS
    NS Bikes Habanero 70mm High-Rise black 31.8 OS (rare, UK purchased)
    Hussefelt Truvativ DH 50mm high-rise black anodized 31.8 OS

    TIRE
    Exiwolf 29x2.3 tires (low mileage) by Wilderness Trail Bikes WTB.

    Located in Concord, CA.
    Lead actor Will of the Sun, Author Platform Pedal Shootout 820K views

  14. #164
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    266
    Have:
    Small 08 Nomad. Complete or frame only. 1.5" headtube.

    Want:
    Cash or Trade for a 5" small frame/bike.

  15. #165
    mtbr member
    Reputation:
    Join Date
    Apr 2007
    Posts
    1,391
    looking for a 140mm to 160 mm 1 1/8 fork. steerer needs to be atleast 8.5 inches and have a 20mm axle. thanks
    64,999,987 firearms owners killed no one yesterday.

  16. #166
    aka baycat
    Reputation: Ryan G.'s Avatar
    Join Date
    Aug 2004
    Posts
    8,484
    New, still in packaging WTB Dissent 2.5 Race tire.

    Trade for smaller volume tire (<2.35)

  17. #167
    mtbr member
    Reputation: maleonardphi's Avatar
    Join Date
    May 2006
    Posts
    593

    Seatpost

    I bought a seatpost for my cross bike last year, never put it on, and realized this weekend its too big.

    Have - 27.0 x 280mm Ritchey WCS aluminum seatpost
    Need - 26.8 x whatever seatpost

  18. #168
    mtbr member
    Reputation:
    Join Date
    Apr 2007
    Posts
    1,391
    09 xl blur lt2 frame. ano black. rp23. never built. pm for $
    64,999,987 firearms owners killed no one yesterday.

  19. #169
    mtbr member
    Reputation: maleonardphi's Avatar
    Join Date
    May 2006
    Posts
    593
    Looking for a 90 or a 100mm 25.4 stem. Nothing fancy, just helping a friend get on his 1st mountain bike.

  20. #170
    mtbr member
    Reputation:
    Join Date
    Nov 2007
    Posts
    1,240
    Have:
    03' Giant VT frame
    7.5x2.0 Swinger Air, just rebuilt
    Hayes Stroker trail (white) front and Hayes Stroker Carbon (black) rear
    Hayes 9s f/r
    07 RS Revelation coil U-turn (hydrolocked atm but have the parts to fix)
    Race Face Turbine 170mm, ISIS, 4 bolt

    Want:
    27.2 Thomson seatpost (silver prefered, black ok)
    Nice light seat (thinking devo or similar)
    160mm adjustable fork (Wotan, Talas 36, Lyrik)
    Cyclocross/Montercross frame/stuff
    $$

    cheers

  21. #171
    fat boy for life
    Reputation: MerIIIcK's Avatar
    Join Date
    Jan 2004
    Posts
    138
    Quote Originally Posted by maleonardphi
    I bought a seatpost for my cross bike last year, never put it on, and realized this weekend its too big.

    Have - 27.0 x 280mm Ritchey WCS aluminum seatpost
    Need - 26.8 x whatever seatpost
    I need a 27mm seatpost for my peace. Have the stock 26.8 to trade with you.

    I will aslo be needing some stuff to build up my wife's bike. Bought an Access frame and will need a 31.6mm seatpost, 34.9 front der. 29er wheelset and a fork. Thanks in advance for any help.
    08 GT Peace 9r
    06 IH MKIII Comp
    06 IH 7.3

  22. #172
    mtbr member
    Reputation: daylight's Avatar
    Join Date
    May 2009
    Posts
    56
    need a 120-140mm fork, disc

  23. #173
    mtbr member
    Reputation:
    Join Date
    Oct 2007
    Posts
    2,903
    i need a crappy hardtail! small or medium.. the more basic the better, doesnt even need to be in good shape or necessarily rideable, and i need one quick! strongly prefer a 1 1/8th head tube, but ill take a 1 inch too.

  24. #174
    Paper or plastic?
    Reputation: zorg's Avatar
    Join Date
    Jul 2004
    Posts
    8,712
    Got a 12" wheel boy kiddie bike. Old but working.

    Got a 2.35 tubetype Kenda Blue Groove that has only 1 ride on it.

    Looking for a rear derailleur (short cage) and rear shifter.
    Faster is not always better, but it's always more fun

  25. #175
    mtbr member
    Reputation:
    Join Date
    Aug 2009
    Posts
    1
    Have: a '02 Raleigh M800 frame near new, hardtail medium size (color red/yellow/black) with matching WTB saddle

    Want: $, crankset, FS frame, wheelset

  26. #176
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    266
    Looking for a 30.9 > 31.6 seat post shim..

    Or if anyone wants to trade my Thomson 30.9 setback seatpost for a 31.6?

  27. #177
    fat boy for life
    Reputation: MerIIIcK's Avatar
    Join Date
    Jan 2004
    Posts
    138
    Where can I get a cheap small bike for my nephew (10 yrs old). He wants to go biking with me.
    Also looking for some parts to finish my wife's bike Access 29er. Need a 31.6 seatpost and a 29er wheelset and a fork.

    I have some parts to trade with
    Easton Monkeylite handle bar XC and SL lo, ea30 lo rise handle bar, raceface diabolus os bar.
    lock on grip, platform pedals.
    I'll add more as I find more of my stuff.
    08 GT Peace 9r
    06 IH MKIII Comp
    06 IH 7.3

  28. #178
    new and improved
    Reputation: El Santo's Avatar
    Join Date
    Mar 2005
    Posts
    398
    Quote Originally Posted by SJensen
    looking for a 140mm to 160 mm 1 1/8 fork. steerer needs to be atleast 8.5 inches and have a 20mm axle. thanks
    check your PM.

  29. #179
    organically fed
    Reputation: w00t!'s Avatar
    Join Date
    Apr 2008
    Posts
    1,175
    Want: 80-100 mm susp. fork. Preferably not too crappy and not too f'd up; 7"+ steer tube, 1 1/8".

    Have: cash, Deore 9-speed shifter, organic chicken eggs (Marans eggs, the preferred egg of James Bond).

  30. #180
    mtbr member
    Reputation: 2clue's Avatar
    Join Date
    Jun 2007
    Posts
    1,263
    I have a pair of CrankBrothers 50/50 xx and Truvativ Holzfeller Pedals

    Would like to trade either on of them for a pair of Mallets or Acids.

  31. #181
    Uncle
    Reputation: Entrenador's Avatar
    Join Date
    Oct 2004
    Posts
    3,951
    Quote Originally Posted by w00t!
    Want: 80-100 mm susp. fork. Preferably not too crappy and not too f'd up; 7"+ steer tube, 1 1/8".

    Have: cash, Deore 9-speed shifter, organic chicken eggs (Marans eggs, the preferred egg of James Bond).
    PM sent.
    Great prices - some sweet vintage stuff: http://classifieds.mtbr.com/showprod...product=101010

  32. #182
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    266
    Want:
    31.8 80mm stem
    1 1/8 Lyrik or Talas
    Cash

    Have:
    Crank Bros Candy C
    MRP System 3 Chain Guide (standard ISCG)
    08 1.5" Steerer Fox 36 Talas
    Thomson 1.5" 45mm 0 deg stem
    Last edited by JHANguyen; 08-14-2009 at 07:48 PM.

  33. #183
    PCC
    PCC is offline
    mtbr member
    Reputation:
    Join Date
    Sep 2005
    Posts
    1,081
    Quote Originally Posted by tomsmoto
    i need a crappy hardtail! small or medium.. the more basic the better, doesnt even need to be in good shape or necessarily rideable, and i need one quick! strongly prefer a 1 1/8th head tube, but ill take a 1 inch too.
    I have a crappy hard tail frame that I had bought to use as my commuter bike. It's in rough shape as it looks like it was a student's reject as someone was learning to weld aluminum but it works. They clearcoated right on top of the bare aluminum so it looks kind of funky. LMK if you are interested. I think it's a 15 or 16".

    Quote Originally Posted by MerIIIcK
    Also looking for some parts to finish my wife's bike Access 29er. Need a 31.6 seatpost
    I have a 31.6mm seatpost that came off of my buddy's GT iDrive. It's black and has the GT logo on it in silver with a silver clamp area. He only rode with that seatpost a few times so it's essentially in new condition.

    I'm mainly looking for road bike stuff at this point. Have any old Suntour indexing shifters?

  34. #184
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    266
    ,,,,,
    Last edited by JHANguyen; 08-14-2009 at 07:48 PM.

  35. #185
    mtbr member
    Reputation:
    Join Date
    Apr 2009
    Posts
    1

    Looking for a fork.

    Looking for any fork lighter and stronger than my current RockShox Dart 1. Looking to pay $150-200.

  36. #186
    No unpermitted erections
    Reputation: Finch Platte's Avatar
    Join Date
    Nov 2003
    Posts
    12,510
    Quote Originally Posted by Committee-X
    ...girlfriend
    Pstpxpls, thx.

  37. #187
    mtbr member
    Reputation: killjoyken's Avatar
    Join Date
    Jun 2009
    Posts
    575
    Want:
    Saint M810 or XT M775 brakes
    DHX5 coil 7.875x2.25

    Have:
    08 Avid Code (galvanized)
    Thomson seatpost 30.9 x 367 straight
    2.1 Nevegals (like new)
    Gamut chainguide and bash ring (iscg old or bb mount)

    I'm in San Jose.

  38. #188
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    266
    Want:
    front QR skewer

    Have:
    Cash
    Beer

  39. #189
    Ride Responsibly
    Reputation: LWright's Avatar
    Join Date
    Jan 2006
    Posts
    1,946
    I have a 27.2 Thompson setback and I need a 30.9 Thomson setback. Got my 30.9, thanks Chris.
    I have a rear triangle from an older Santa Cruz Superlight, also a nice hitch rack. Need a 100mm fork for my new superlight, running 80mm now.
    Last edited by LWright; 09-14-2009 at 10:19 PM.

  40. #190
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    80
    Quote Originally Posted by LWright
    I have a 27.2 Thompson setback and I need a 30.9 Thomson setback

    have anything else?, i have a 30.9 thomson set back i don't think im going to use

  41. #191
    mtbr member
    Reputation: Stumpy_Steve's Avatar
    Join Date
    Aug 2006
    Posts
    2,342
    Quote Originally Posted by JHANguyen
    Want:
    front QR skewer

    Have:
    Cash
    Beer
    Dibs. I've got a specialized generic front quick release. Hell, I'll throw in the stock shimano rear, too. It actually worked better than my salsas, but I paid too much for them, so I might as well use them. 6 pack? You're in Fremont, yes?

  42. #192
    Ride Responsibly
    Reputation: LWright's Avatar
    Join Date
    Jan 2006
    Posts
    1,946
    I have a new WTB 32 hole front disk hub, labeled "LaserDisk" DH. It is not the 20mm, rather it is a 12 mm thru axle convertible to a QR.
    Big ring 94 42 A USA no shift ramps.
    Rear triangle for a 2002 ish Superlight.
    Last edited by LWright; 08-18-2009 at 11:40 AM.

  43. #193
    mtbr member
    Reputation: daylight's Avatar
    Join Date
    May 2009
    Posts
    56
    Looking for a frame w/rear shock.

    Have a rockshox dart 1, some one-piece wtb grips, and kenda krusher tires, if anyone is interested.

  44. #194
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    80
    Quote Originally Posted by LWright
    I have a new WTB 32 hole front disk hub, labeled "LaserDisk" DH. It is not the 20mm, rather it is a 12 mm thru axle convertible to a QR.
    Big ring 94 42 A USA no shift ramps.
    Rear triangle for a 2002 ish Superlight.
    pm sent

  45. #195
    newie
    Reputation:
    Join Date
    Jan 2009
    Posts
    191
    have:
    planet x hammerhead 21.75TT frame w/beat up raceface bb, 27.2 thomson stem, shadow conspiracy bmx seat, salsa seat post clamp and blue ck headset (currently raw frame)
    hayes sole hydraulic brake
    bontrager big bars cut mad short for dj w/ odi ruffian lockons
    stp stem
    thomson elite x4 stem, all good except that one of the clamp threads needed to be retapped a larger size because the old threads got mangled by a bike noob(me).

    need:
    aluminum frame with longer TT and ability to run pikes at max travel
    rear derailleur, cassette and shifter


    edit:
    would love to deal with some local mtbrs and possible ride when my fork gets back from push and my wheel from chris king!

  46. #196
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    153
    Need:

    Decent platform pedals for my wife

    Have:
    Some cash/beer
    Shimano PD-520 clipless pedals

  47. #197
    flow where ever you go
    Reputation: noshortcuts's Avatar
    Join Date
    Nov 2005
    Posts
    1,516

    WTT Thomson for Thomson

    Have for trade or sale:
    Stems:
    • Thomson X4 120mm 0 deg, mint
    • Ibis 31.8 x 90mm +/- 8 deg, mint


    Seat Posts:
    • Thomson Elite 30.9 x 367mm, used
    • Thomson Elite 31.6 x 367mm setback, new in bag


    Need:
    • Thomson Elite 30.9 setback seatpost (may consider other high end / light / strong posts)
    Last edited by noshortcuts; 08-27-2009 at 06:39 PM. Reason: ELIMINATED ITEMS ALREADY TRADED

    "I must not be crazy because I'm seriously questioning my sanity"

  48. #198
    mtbr member
    Reputation:
    Join Date
    Jan 2006
    Posts
    205
    ...

  49. #199
    mtbr member
    Reputation:
    Join Date
    Jan 2006
    Posts
    205
    For Trade
    Intense 909 Exdc Lite Tires X 2

    Performance Loco Wheelset w/ 20MM Thru axle front and 135MM QR rear.
    Kenda Wheelbag X2
    WTB Power V saddle X1
    Kenda SuperLite 29er Tubes X4

    Looking for Maxxis Minion DHF UAT 2.5s, Gravity Dropped 30.9, Kenda Nevegals 2.35s and 2.5s or Cash
    Last edited by TACORICAN; 08-30-2009 at 09:35 PM.

  50. #200
    ACS
    ACS is offline
    mtbr member
    Reputation: ACS's Avatar
    Join Date
    Mar 2004
    Posts
    137
    I need the the clamp part of a Thomson stem. This is the non OS stem with the cylindrical hole that the clamp slides into. My wife threw mine away while my bike was apart.

    I have a bunch of parts lying around that I'll swap.

Page 4 of 37 FirstFirst 1 2 3 4 5 6 7 8 14 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •