I've got a Commencal Supreme Mini DH with IS rear disc mounts.
I've fitted 203mm rear rotors and have an old set of Hope DH4 callipers. These would normally accept 160 rotors if directly bolted to the frame mounts.
I bought Hope HBIS40 adapters, but these fouled the frame IS mounts and would have needed too much material removing to have fitted.
I've therefore bought a Shimano 203 adapter which fits the frame's IS mount perfectly, but now holds the calliper too high and therefore the pads are about 1-2mm above the edge of the rotor.
Has anyone else had similar issues using adapters please? and more importantly, how did you get around this?
Results 1 to 2 of 2
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »