As posted a few weeks ago, I was having problems getting my magura marta/king iso/fox fork to set up properly. After facing of 1mm of material, I was still having problems. After running through everything on the list to see what was up, Jimi sent me out a new caliper, without waiting for mine to get back to him.
Well, the new rotor bolted right up, and while I did need to machine that 1mm off, all problems seem to have subsided, no more rubbing, though I have a tad bit of squeeling to get rid of.
Then after bleeding, in a bout of my own impatience, stupidity, and working on a bike at 2am... I overtightened the resovoir cap bolts. I needed to bleed again, and they wouldn't come out. Well, on a suggesting from Magura, I cut slots in the screws (they are tiny) to use a screwdriver insted of the very small torx bolt. They came out no problem and 2 new screws are on the way (I told them my fault... ). Though, a slot in those screws wouldn't be a bad idea from the factory.
Again, great customer service from the boys at Magura.
Results 1 to 2 of 2
Thread: Once again, Kudo's to magura
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »