Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation: shwinn8's Avatar
    Join Date
    Feb 2006
    Posts
    1,913

    test

    I received the master cylinder and this little metal pin was in the bag. looks like it goes into the empty bleed hole. if so, how do i get it in there without damaging the lever casing?



    Last edited by shwinn8; 12-14-2012 at 08:50 PM.
    '11 Jedi
    '01 Straight8
    '01Rocket88< ran over it.. always do a full walk around!
    '00 Homegrown

  2. #2
    mtbr member
    Reputation:
    Join Date
    Aug 2006
    Posts
    233
    That plug you have is for the old Nine & Sole disc brakes abnd won't work with your lever assembly. There are two T10 screws for bleed ports on that lever, and it looks like you need to get one if not two of them. Take it back to the shop with your receipt and they should be able to help you out.
    You are not what you own.

  3. #3
    mtbr member
    Reputation: shwinn8's Avatar
    Join Date
    Feb 2006
    Posts
    1,913
    thank you for the reply, only needed one bleed screw. i ended up getting one off of Universalcycles.com along with a caliper rebuild kit
    '11 Jedi
    '01 Straight8
    '01Rocket88< ran over it.. always do a full walk around!
    '00 Homegrown

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •